User manual ACER CS-5530

[. . . ] E ENGLISH 2-E Digital Camera >> FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The smaller the value, the darker the image. The set value is displayed on the screen. E-37 Effective Subjects and Set Values + (positive) compensation * Printed matter comprising black text on whitish paper * Backlighting * Bright scenes or strong reflected light such as ski slopes * When the sky accounts for a large area on the screen - (negative) compensation * People illuminated by a spotlight, in particular, against dark background * Printed matter comprising white text on blackish paper * Weak reflecting bodies such as evergreen trees or darkish leaves Backlight correction (+1. 3, fixed) * When the background is bright and the subject is dark. * When subjects (people) have a light source such as the sun to their backs. 38-E Digital Camera >> User's Manual >> [ ] Movie Mode This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels. Compose the picture with the zoom button. The recording of the video clip will start. Pressing the shutter button one more time will end the recording of the video clip, and record the image into the SD card. The recording time depends on the storage size and the subject of the image to be recorded. Zoom function cannot be used while a video clip is recording. In the [ ] mode, the LCD monitor cannot be turned off. When recording a video clip, flash photography is not possible. While the image is being recorded into the SD card, do not open the battery/SD card cover, nor remove the battery or SD card. Doing so might damage the SD card or destroy the data of the SD card. While composing the image, optical zoom and digital zoom functions can be used at the resolution of 320 x 240 pixels. However, digital zoom function cannot be activated at the resolution of 640 x 480 pixels. E-39 [ ] PLAYBACK MODE 40-E Digital Camera >> Playing Back Still Images You can play back the still images on an LCD monitor. Insert the SD card into the camera and turn on the power before starting. The images can be fed in reverse or fed forward with the / buttons. Image Display Information You can switch the state of the information display by pressing the button when playing button back images. Each press of the switches the information display state in the following order: 1853KB Pressing the / buttons during image playback will result in a 90 button rotates the image clockwise and button rotates the image counterclockwise degree rotated display. The displays it, whereas the and displays it. A press of the button opposite to the direction in which the image was rotated will return the image to the normal display. [ A[ ] icon is displayed with the video data. ] icon is displayed with images which have an audio memo recorded. Press the SET button to playback the voice memo data. The condition of the information display cannot be switched with video clips. User's Manual >> Playing Back Video Clips You can play back video clips recorded on the camera. Select the desired video clip with the / 3. [. . . ] Select the images that you want, and then choose "Copy" from the "Edit" menu. Open the destination location (folder) and choose "Paste" from the "Edit" menu. You may also drag and drop image files from the camera to a desired location. Macintosh Open the "untitled" disk icon, and the destination location on your hard disk. Drag and drop from the camera to the desired destination. Do not open the battery cover during USB cable connection. [. . . ]