User manual ACER EXTENSA 7620G

[. . . ] Record the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number, and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated. Extensa 2350/2950 Series Notebook Computer Model number : _________________________________ Serial number: ___________________________________ Purchase date: ___________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. [. . . ] Acer eRecovery consists of the following functions: 1 2 3 4 5 Create backup Restore from backup Create factory default image CD Re-install bundled software without CD Change Acer eRecovery password This chapter will guide you through each process. Note: For systems that do not have a built-in optical disc burner, plug in an external USB or IEEE1394 compatible optical disc burner before entering Acer eRecovery for optical disc related tasks. Create backup User can create and save backup images to hard drive, CD, or DVD. 1 2 3 4 5 6 Boot to Windows XP Press <Alt> + <F10> to open the Acer eRecovery utility. In the Acer eRecovery window, select "Recovery settings" and click "Next". In the Recovery settings window, select "Backup snapshot image" and click "Next". a Use "backup to HDD" to store the backup disc image on drive D. 47 b 7 -"Backup to optical device" to store the backup disc image on CD or DVD. English After choosing the backup method, click "Next". Follow the instruction on screen to complete the process. Restore from backup User can restore backup previously created (as stated in Create backup section) from hard drive, CD, or DVD. Press <Alt> + <F10> to open the Acer eRecovery utility. In the Acer eRecovery window, select "Recovery actions" and click "Next". There are four restore actions available. Select the desired restore action and follow the onscreen instructions to complete the restore process. Note: The "Restore C:" item is enabled only if there is a user backup stored on the hard drive (D:\). Please refer to the Create backup section. Create factory default image CD When the System CD and Recovery CD are not available, you can create them by using this feature. Press <Alt> + <F10> to open the Acer eRecovery utility. Make sure the [Acer D2D Recovery] setting in [Main] is [Enabled]. Exit the BIOS Setup Utility and save changes. The system will reboot. Note: To activate BIOS Setup Utility, press <F2> during POST. 50 2 Customizing my computer English 1 2 3 4 5 6 7 Restart the system. The instruction "Press <F2> to Enter BIOS" is shown at the bottom of the screen, during POST. Press <Alt> + <F10> at the same time to enter the recovery process. The message "The system has password protection. Please enter 000000:" is displayed. "Acer Self-Configuration Preload" window appears. Use the arrow keys to scroll through the items (operating system versions) and press "Enter" to select. Setup password and exit Press "F3" to setup password or press "F5" to exit the system recovery process when "Acer Self-Configuration Preload" window appears. If "F3" is pressed, the next screen shows "Please enter new password:" enter one to eight alphanumeric characters. You will be asked to reenter your password for confirmation before continuing. [. . . ] 4, 631, 603, 4, 577, 216, 4, 819, 098, 4, 907, 093, and 6, 516, 132 licensed for limited viewing uses only. English Radio Device Regulatory Notice Note: Below regulatory information is for models with wireless LAN and/or Bluetooth® only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth® modules). Below information is for products with such devices. European Union (EU) This device complies with the essential requirements of the European Council Directives listed below: 73/23/EEC Low Voltage Directive · · · · EN 60950 EN 55022 EN 55024 EN 61000-3-2/-3 89/336/EEC Electromagnetic Compatibility (EMC) Directive 99/5/EC Radio & Telecommunications Terminal Equipment (R&TTE) Directive · · · · Art. 3. 1a) EN 60950 Art. 3. 1b) EN 301 489 -1/-17 Art. 3. 2) EN 300 328-2 Art. 3. 2) EN 301 893 *applied to 5 GHz only 78 Appendix B Notices English List of Applicable Countries EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece, Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in the countries of European Union, as well as Norway, Switzerland, Iceland and Liechtenstein. [. . . ]