User manual ACER G215HV

[. . . ] 3 Special Notes on LCD Monitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 IT Equipment Recycling Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Chapter 1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be performed by an authorized technician. Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD Monitor outside this range could result in permanent damage. If any of the following occurs, immediately unplug your monitor and call an authorized technician. * * * Monitor to PC signal cable is frayed or damaged. Liquid spilled into LCD Monitor or the monitor has been exposed to rain. LCD Monitor or the case is damaged. 7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight above 3 kg, a line not lighter than H05VV-F, 3G, 0. 75 mm2 must be used. Special Notes on LCD Monitors The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES · Due to the nature of the fluorescent light, the screen may flicker during initial use. Make sure connections are secure. Figure 1-5 Connecting the AC Power 1. Connect the power cord to the LCD Monitor. Connect the power cord to an AC power source. Figure 1-6 Power Management System This LCD Monitor complies with the VESA DPMS (version 1. 0) Power Management guidelines. The VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will light yellow. 6 Chapter 2 Display Controls General Instructions Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 2-1). By changing these settings, the picture can be adjusted to your personal preferences. Connect the video cable from the monitor to the video card. Press the power button to turn on the monitor position. The power indicator will light up. Figure 2-1 External Controls 1 2 3 Auto Adjust Key/Exit < > 4 5 6 Menu/Enter LED / Power Key 7 Front Panel Control /Power Button: Press this button to turn the monitor ON or OFF, And display the monitor's state. Power Indicator: Green -- Power On mode. [. . . ] Description Adjusts the contrast between the foreground and background of the screen image. Adjusts the background brightness of the screen image. Adjusts picture Focus Adjusts picture Clock Adjust the horizontal position of the picture. Adjust the vertical position of the picture. [. . . ]