User manual ACER G226HQL

[. . . ] 3-35 Using the Screen Adjustment Menu (OSD: On Screen Display) . 3-36 INSTALLING THE SOFTWARE Natural Color . 4-4 TROUBLESHOOTING Monitor Self-Diagnosis . 5-3 MORE INFORMATION Specifications . [. . . ] Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, refer to the document about the Windows operating system. Using the product 3-34 3-35 Product Operating Buttons Product Operating Buttons Icon Description Press this button to view the On Screen Display (OSD). This button is also used to exit the OSD or to return to a higher-level OSD menu * OSD Adjustment Lock This function locks the OSD in order to maintain the current settings or to prevent the settings from being changed by another person On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock function is activated. Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment Lock function is disabled. Even if the OSD Adjustment Lock function is activated, users can adjust the brightness and contrast and can set up the adjustment function assigned to the [ ]. Users can set the <Customized Key> to one of the following functions. If the user presses the <Customized Key> [ ] after setting it, the configured function will be performed · · PC signals : <MagicBright> - <MagicAngle> - <MagicEco> - <Image Size> AV signals : <Picture Mode> - <MagicAngle> - <MagicEco> - <Image Size> You can set the function of the <Customized Key> by selecting <SETUP&RESET> -> <Customized Key> in the OSD. Use these buttons to navigate the menu or to adjust a value in the OSD. / Use this button to control the brightness of the screen. 3-35 Using the product Icon Activates a highlighted menu item. Description In the <Customized Key> menu, you can also use this button to sequently switch between functions in the <Customized key> menu as desired. Use this button to select a function If you press the [SOURCE] button when there is no OSD, the input signal (Analog/Digital/HDMI) is switched. When the input signal is switched by pressing [SOURCE] button or the product is turned on, a message displaying the selected input signal appears at the top left of the screen. You can select Custom which automatically recalls your personalized picture settings. · · Picture Mode · · <Dynamic> Select this mode to view a sharper image than in Standard mode. <Standard> Select this mode when the surroundings are bright. <Movie> Select this mode when the surroundings are dark. This will save power and reduce eye fatigue. <Custom> Select this mode when you want to adjust the image according to your preferences · · This can only be set when the external input is connected through HDMI/DVI and <PC/AV Mode> is set to <AV>. This menu is unavailable when <MagicAngle> or <MagicEco> is set. Using the product 3-36 Menu Description This feature allows you to see optimal screen quality according to your viewing position. When viewing the screen at an angle from below, above or the side of the monitor, by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front. Set to <Off> when viewing directly in front of the screen. · · · · · · <Off> - Select when viewing from the front position. - Select when viewing from a slightly lower position. [. . . ] If the product enters power saving mode, the power LED turns to a different color to indicate that the product is in power saving mode. When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key or clicking the mouse. However, the power saving function only works when the product is connected to a computer that provides the power saving function. STATE Power Indicator Power Consumption NORMAL OPERATION On 45 W POWER SAVING MODE Blinking Less than 0. 3 watts POWER OFF Off Less than 0. 3 watts If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected. 6-60 More Information 6-61 Specifications MODEL NAME Size LCD Panel Display area Pixel Pitch Synchronization Display Color Resolution Optimum resolution Maximum resolution Horizontal Vertical 23. 6 inches (59 cm) 521. 28 mm (H) x 293. 22 mm (V) 0. 2715 mm (H) x 0. 2715 mm (V) 30 ~ 81 kHz 56 ~ 75 Hz 16. 7 M 1920 x 1080 @60Hz 1920 x 1080 @60Hz RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB Input Signal, Terminated 0. 7 Vp-p ± 5% separate H/V sync, Composite, SOG TTL level (V high 2. 0V, V low 0. 8V) Maximum Pixel Clock Power Supply 164 MHz (Analog, Digital) This product supports 100 ­ 240 V. [. . . ]