User manual ACER G236HL

[. . . ] 3-6 INSTALLING THE SOFTWARE Using Windows XPe . 4-4 TROUBLESHOOTING Monitor Self-Diagnosis . 5-3 MORE INFORMATION Specifications . 6-3 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only . [. . . ] · <Off> - <On> 3-6 Using the product Menu Language Select a language for the OSD. Description The selected language is only applied to the product OSD. This setting does not affect the other functions of the PC. Used to set the product so that it automatically turns off at a certain time. · On Timer <Off> - <On> Used to set the product so that it automatically turns on at a certain time. · <Off> - <On> On Timer Source Used to adjust the mode when the product is automatically turned on. · <Analog> - <Client> On Timer Volume Display Time Automatically adjusts the volume to a certain level when the product is turned on. The OSD automatically disappears if no action is taken by the user. You can determine the time to wait before the OSD is hidden. · <5 sec> - <10 sec> - <20 sec> - <200 sec> Customized Key You can set the function of the Customized Key to one of the following. · <MagicBright> - <MagicColor> - <Color Effect> - <Image Size> INFORMATION Menu INFORMATION Description Shows the frequency and resolution set on the PC. Using the product 3-6 4 4-1 Installing the Software Using Windows XPe What is XPe Client? An Microsoft Windows XP Embedded(XPe) client uses the Microsoft Windows XP Embedded operating system. When an XPe client is connected to a Citrix ICA server or another server that can provide the Microsoft RDP service, data for the keyboard, mouse, audio/video and display are transmitted through the network between the client and the server. Connectable Servers · A Citrix ICA (Independent Computing Architecture) Server · · · · · · A Microsoft Windows 2000/2003 Server where the terminal services and Citrix MetaFrame are installed A Microsoft Windows NT 4. 0 Server where the Citrix MetaFrame is installed A Microsoft Windows 2000 Server where the terminal services are installed A Microsoft Windows 2003 Server A Microsoft Windows XP Professional This manual describes the functions provided by the XPe Client. (In the case of logging off, the configuration is remembered when loggin in again. ) For more information on the Enhanced Write Filter, refer to the Program Help . Programs The Remote Desktop Connection You can control a running terminal server or another computer (Windows 95 or later) remotely through a remote desktop connection. · Remote Desktop · · · Windows XP Professional or Windows 2000/2003 Server must be installed on the computer to be controlled remotely. A remote computer running on an operating system later than Windows 95 is required. This remote computer is called a client. The client software for the remote desktop connection must be installed on the client. You must also be connected to the Internet. A broadband Internet connection is good for high performance. However, because the remote desktop transmits a minimum set of data including the display data and keyboard data to control the host remotely, a broadband Internet connection is not required. You can run a remote desktop on a low bandwidth Internet connection. When running a remote desktop on Windows XP Professional, you cannot use the operating system of your computer. · Enabling Your Computer as the Host You must enable the Remote Desktop feature to control it from another computer. [. . . ] Windows ME/XP/2000 : Set the color again by selecting Control Panel Display Settings. Is the graphics card configured correctly?Configure the color again in accordance with the new graphics card driver. When I connect the monitor, the 'Unknown monitor, Plug&Play (VESA DDC) monitor found' message is displayed. Did you install the device driver for the product? [. . . ]