User manual ACER G247HL QUICK START GUIDE

[. . . ] Note that if an icon is highlighted, it will automatically be selected after approximately three seconds. To return to the Home Screen, press the remote control’s Back button. €¢ Using the WPS button on the Wireless Adapter - Briefly press the WPS button to move between the icons. When an icon is left highlighted for approximately three seconds, it will automatically be selected. [. . . ] Ensure that the renderer is set as the MWA2 (Acer_MWA2_XXXX). Start playing media on your computer or other device. 10 Using Miracast If your device supports Miracast, you can use this instead of eDisplay. If you do not already see Acer_MWA2_XXXX on the list of Wireless displays, tap SEARCH FOR DISPLAYS. If asked to do so, press the WPS button on the MWA2 Wireless Adapter, or input the PIN code shown on the screen (see below) into your mobile device. After several seconds, the projector/monitor/TV will start displaying what is shown on the screen of your mobile device. Note that you must have Wi-Fi enabled on your mobile device in order for Miracast to work. At the time of writing, the following is a list of Acer MWA2 Miracast™ compatible devices: Acer MWA2 Miracast™ compatible devices (July, 24 2013) Google HTC LG Sony Nexus 4 New One (International version) Optimus G Xperia T Xperia TX Xperia V Xiaomi Xiaomi Phone 2 12 Using the Acer MWA Remote App As an alternative to using the remote control of your projector/monitor/TV, you can control the MWA2 Wireless Adapter directly from your mobile device using the Acer MWA Remote app, as follows: 1. Download and install the Acer MWA Remote app (shown above) from the Apple Store or Google Play (alternatively you can go straight to the download link by scanning the QR barcode on the projector/monitor/TV display if you have a suitable QR barcode scanner on your mobile device). The QR barcode is highlighted in the image below: 13 2. Open the Acer MWA Remote app on your mobile device. If ON, then a password will be required by any devices trying to connect to the MWA2 Wireless Adapter. €¢ PSK (Pre-Shared Key) - If security is switched ON, this is the password you will be asked to input on your mobile device in order to connect to the MWA2 Wireless Adapter. To change either of these settings, select their entry field and a virtual keyboard will appear on-screen. When finished typing any values, use the back button to exit that field. Once all fields have been filled, select the tick at the bottom of the screen to confirm (shown below). 18 Client Mode In Client Mode, you will see a list of available APs that you can connect your MWA2 Wireless Adapter to, as follows: 1. (If you do not see the AP you are looking for, try selecting Refresh. If the AP is hidden, you can add it manually by selecting Add and inputting the necessary details. If the network requires a password, you will be asked to input the PSK. Highlight the PSK entry field and an on-screen keyboard will appear. Fill in the PSK using the on-screen keyboard. [. . . ] IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: Country code selection is for non-US models only and is not available on all US models. [. . . ]