User manual ACER HR274H

[. . . ] Do not use any liquids or aerosol sprays to clean this device. To avoid damaging the device, only use factory-approved accessories. In order to set up the device, first place it on a stable surface. Tipping it over or dropping can harm the monitor and cause injuries. [. . . ] The ventilation openings are used for air circulation to protect the device against overheating. When connecting the device, obey the maximum connected load values of the main power supply. The wall socket must be equipped with a non-fused grounded conductor contact for electrical safety. The power cable must be laid in such a way nobody can trip over it. Please do not place any objects on the cable. Follow all instructions and warning remarks that are printed on the device. If the device will not be used for a long period of time, please disconnect it from the main power supply to avoid power surge damage such as lightning. Make sure no sharp objects or liquids enter the device via its air circulation openings. This could result in a fire or an electric shock. Never open the device casing yourself, there are no user serviceable parts inside. Only authorized technical service personnel should open the casing of this device. The on-screen display allows you to customize the display settings to suit your individual taste. Features 17-inch monitor with a large, viewable screen for comfortable viewing. OSD user controls for easy and accurate adjustment of the screen image. Energy Star compliant for reduced power consumption. Package Overview Please make sure the following items are in the packing it was shipped in, and found in good working condition: 17" Monitor Power Cord Tilt and Swivel Base This User's manual Please contact your dealer or nearest service centers if any of the above items is missing or damaged. 7 Installation 1. 2. Connect the monitor signal cable 1 to the 15-pin mini D-sub (VGA) on the back of the computer. Connect the power cord to the power connector on the back panel of the monitor, then plug the other end into an electrical outlet that is easily accessible, and close to the monitor. First turn on the power of the computer, then that of the monitor. Adjust the tilt of the swivel base for maximum viewing comfort. 3. 4. The installation of your monitor is now complete. 8 User Controls 1. Power Switch 2. Power LED Indicator LED color Status On Sleep Turns the monitor on Green Amber 3. Select Button · Launches On -Screen Display · Make sure the select functions or adjustments 4. Backward and Forward Buttons · Backward button (left arrow) moves backward through menu options or decreases adjustment levels. · Exit menus and On-Screen Display · Forward button (right arrow) moves forward through menu options or increases adjustment levels. 9 OSD Function Description 1. Press the key to display the OSD menu. and keys until the desired function is 2. To select a function, press the highlighted. [. . . ] Select the select the key to choose the function. and keys to increase or decrease the parameter level of the setting. key to save the new setting. icon if you want to exit the OSD function, and then press the key once. 10 OSD Icon Summary Icon Function Brightness Contrast H. Balance Pincushion Parallelogram Trapezoid Rotation Color Temp. [. . . ]