Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ACER IDUR. We hope that this ACER IDUR user guide will be useful to you.
Lastmanuals help download the user guide ACER IDUR.
Manual abstract: user guide ACER IDURInstallation Guide
Detailed instructions for use are in the User's Guide.
[. . . ] Pull the lower panel to access the drive trays.
You cannot remove the key after you have unlocked the housing. You can remove it only when you lock the housing again.
8
Installation Guide
5. 3
Left Panel
Pull on the key to swing the left panel open. [. . . ] Pull out the lower part of the holding plate and unhook the upper part from the housing roof.
You may need to pull the plate downward to remove it easier.
IDUN Housing
17
9.
Remove the screws that secure the metal cover of the upper power supply bay to the rear panel.
10. Remove the screws that secure the power supply module. process, make sure to support the module with your hand.
In the
18
Installation Guide
7. 2
1.
Installing the Power Supply Modules
After you have removed all the screws that secure the existing power supply module to the lower bay, carefully move the module to the upper power supply bay. When in place, secure the first power supply with screws.
2.
3. 5.
Get the second redundant power supply ready. Firmly hold the power supply and align it to the lower bay. When in place, secure the second power supply with screws.
6.
Reinstall the right door but do not close it completely.
IDUN Housing
19
7.
Connect all the power supply cables to the connectors on the power sharing board. Make sure to connect the connectors of power supply 1 to the three upper connectors on the power sharing board. Connect the connectors of power supply 2 to the three lower connectors on the power sharing board.
The power connectors are foolproof and connect only in one direction. If a connector does not fit in completely, reverse its orientation then try to reconnect.
Cable connections for power supply 1 Power sharing board
Cable connections for power supply 2
8.
Arrange all the cables from the power sharing board and fans to facilitate connection to the system board and disk drives. Do not let power cables block the housing exhaust and fans. Close the right door completely and secure it with the screws that you removed earlier.
9.
10. [. . . ] Insert the board into the connector.
Make sure that the board is properly seated in the connector.
3.
Secure the board with a screw.
IDUN Housing
25
4. 5.
Align the plastic support bar with the board edge. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ACER IDUR
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ACER IDUR will begin.
