User manual ACER P1201B

[. . . ] 4 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Once in standby mode, simply press "Power/Standby" button to restart the projector. Disconnect the power cord from the electrical outlet and the projector. Do not turn on the projector immediately following a power off procedure. Warning Indicator When the "TEMP" indicator turns red, it indicates the projector has overheated. The projector will automatically shut itself down. When the "LAMP" indicator flashes red (0. 5 second intervals), it indicates a problem with the lamp. Turn off the projector and disconnect the power cord from the electrical outlet, then contact your local dealer or our service center. When the "LAMP" indicator flashes red (1 second intervals), it indicates the fan failed. Stop using the projector and disconnect the power cord from the electrical outlet, then contact your local dealer or our service center. 12 Installation Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with an elevator foot for adjusting the image height. To raise the image: 1. Raise the image to the desired height angle , then release the button to lock the elevator foot into position. Lower the image, then release the button to lock the elevator foot into position. Adjusting the contrast changes the amount of black and white in the image. 4 Press the to decrease the contrast. Color Temperture Adjust the color temperature. At higher temperature, the screen looks colder; at lower temperature, the screen looks warmer. 19 . . . English User Controls Color White Segment Use the white Segment control to set the white peaking level of DMD chip. 0 stands for minimal segment, and 10 stands for maximum segment. If you prefer a stronger image, adjust towards the maximum setting. For a smooth and more natural image, adjust towards the minimum setting. Degamma Effects the represent of dark scenery. With greater gamma value, dark scenery will look brighter. Color R Adjusts the red color. Color G Adjusts the green color. Color B Adjusts the blue color. Saturation "Saturation" and "Tint" functions are not supported under computer mode or DVI mode. Adjusts a video image from black and white to fully saturated color. 4 Press the to decrease the amount of color in the image. to increase the amount of color in the image. 4 Press the Tint Adjusts the color balance of red and green. [. . . ] Refer to page 29. Problem: Image is out of focus 4Adjusts the Focus Ring on the projector lens. 4Make sure the projection screen is between the required distance 3. 9 to 39. 4 feet (1. 2 to 12. 0 meters) from the projector. English . . . 30 Appendices Problem: The image is outstretched when displaying 16:9 DVD. The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting. If the image is still outstretched, you will also need to adjust the aspect ratio by referring to the following: 4Please select 4:3 aspect ratio type on your DVD player if you are playing a 16:9 DVD. [. . . ]