User manual ACER P5290

[. . . ] Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Acer Projector P1165/P1165P/P1265/P1265P/P5260i/P5270/P5280/P5370W Series Model number: __________________________________ Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. [. . . ] Press "PIP" to see two screens at the same time. The main screen projection signal uses VGA input by default while the smaller PIP display uses a secondary video source. 15 16 17 18 19 RGB BRIGHTNESS CONTRAST COLOR VGA 20 COMPONENT 21 22 23 S-VIDEO VIDEO DVI 24 25 26 HDMITM MUTE WIRELESS 27 28 (*) KeyPad 0~9 MOUSE Left/ Right Click 29(*) 30 (*) VOLUME LOCATION PIP 31(#) Note: "*" Only for P5260i series. "#" PIP function is not supported in P5260i. English 8 Note: 9 Getting Started Connecting the Projector DVD player, Set-top Box HDTV receiver VGA, DVI RBG English DVD player USB RS232 D-Sub DVI-D HDMI D-Sub 2 RBG 8 9 RS232 7 4 5 HDTV adapter D-Sub DVI-D USB D-Sub HDMI Y RW D-Sub 1 S-Video Output 3 6 Y D-Sub Video Output # 1 2 3 4 5 Power cord VGA cable Description # 6 7 8 9 S-Video cable Description Audio cable jack/jack DVI cable HDMI cable (P5260i/P5270/P5280/ P5370W series) Composite video cable USB cable VGA to component/HDTV adapter Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. 10 English Connecting the Projector for Wireless Function WLAN 4 2 3 Internet Speaker 1 Power # 1 2 3 4 Power cord Description Audio cable jack Lan cable Antenna Note: For P5260i only 11 Turning the Projector On/Off Turning on the Projector 1 2 3 4 Slide on the lens door. Ensure that the power cord and signal cable are securely connected. Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue. Turn on your source (computer, notebook, video player , etc. ). The projector will detect your source automatically. · If the screen displays "Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. If the screen displays "No Signal", please make sure the signal cables are securely connected. If you connect to multiple sources at the same time, use the "Source" button on either control panel or the remote control or direct source key on the remote control to switch between inputs. English · · 1 POWER 12 English Turning off the Projector 1 To turn off the projector, press the "Power" button twice. The message below will display onscreen for 5 seconds. When the OSD is displayed, use the keys to select any item in the to enter main menu. After selecting the desired main menu item, press submenu for feature setting. · · · · Use the using the keys to select the desired item and adjust the settings by keys. Select the next item to be adjusted in the submenu and adjust as described above. Press "MENU" on the remote control or control panel, the screen will return to the main menu. To exit OSD, press "MENU" on the remote control or control panel again. The OSD menu will close and the projector will automatically save the new settings. Main menu Setting Sub menu 24 English Color setting Display Mode There are many factory presets optimized for various types of images. · · · · · · Brightness Bright: For brightness optimization. Video: For playing video in a bright environment. Blackboard: Blackboard mode can improve displayed color when you project onto darker surfaces. to lighten the image. Adjust the brightness of the image. · · Contrast "Contrast" controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. · · Color Temperature Degamma Color R Color G Color B Saturation Press Press to decrease the contrast. to increase the contrast. Adjust the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. [. . . ] HDMI -Digital (P5260i/P5270/P5280/P5370W series only) 1 2 HDMI - PC Signal and Extended Wide timing: Support above DVI digital timing format. HDMI - Video Signal Modes Resolution 480i (NTSC) 720x480(1440x480) 480p (NTSC) 720x480 576i (PAL) 720x576(1440x576) 576p (PAL) 720x576 720p (NTSC) 1280x720 720p (PAL) 1280x720 1080i (NTSC) 1920x1080 1080i (PAL) 1920x1080 1080p (NTSC) 1920x1080 1080p (PAL) 1920x1080 Horizontal scan rate: Vertical scan rate: V. Frequency [Hz] H. Frequency [KHz] 59. 94(29. 97) 15. 734 59. 94 31. 47 50(25) 15. 625 50 31. 25 60 45. 00 50 37. 50 60(30) 33. 75 50(25) 28. 13 60 67. 50 50 56. 25 31. 5k - 100 kHz 56k - 85 Hz English English 48 49 FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]