User manual ACER PD723P

[. . . ] . . 5 3. 2 Signal connector pin assignment . . . Save these instructions for later use, please. Follow all warning and instructions marked on the product. Unplug this monitor from the wall outlet before cleaning. [. . . ] If the monitor has been dropped or the cabinet has been damaged. When the monitor exhibits a distinct change in performance this indicated a need for service. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. Upon completion of any service or repairs to this monitor, ask the service technician to perform routine safety checks to determine that the monitor is in safe operating condition. The socket outlet shall be near the equipment and shall be easily accessible. The power supply cord is used as the main disconnect device. 1. Installation 1. 1 Package After unpacking the shipping carton, check it if you have received the following items: (1) Your monitor. (3) User's manual. 1. 2 Precautions ­ when using this monitor 1. To avoid eyes fatigue, do not use the color monitor in bright background sunlight or other light sources shine directly on the screen. Do not place the monitor near a heat source. Also you can select EXIT icon or press EXIT key to exit the OSD menu. 2. 2 Adjust and Programming CONTRAST: Adjusts the image brightness in relation to the background. BRIGHTNESS: Adjusts the overall image and background screen brightness. POSITION: To moves the picture image horizontally left or right. SIZE: To adjust the horizontal size of the image. POSITION: To moves the picture image vertically. SIZE: To adjust the vertical size of the image. ROTATION: Rotates the entire display clockwise or counter clockwise. PINCUSHION: To adjust the curvature of the sides TRAPEZOID: To adjust the bottom of the screen to be the same as the top. PARALLELOGRAM: To adjust the tilt of the side. BALANCE: To adjust the curvature of the side. ADVANCED SELECT: MOIRE ADJUSTMENT: The screen image may shake slightly while the moire cancellation function is ON. MOIRE: To adjust the vertical moire of the image. [. . . ] POSITION: Moves the OSD image vertically. TIMER (SEC. ):You can select how long the monitor waits after the last adjust of the knob to shut off the OSD menu. The time setting choices are from 8 to 60 seconds. RESET: Reset all settings and back to the factory defaults. [. . . ]