User manual ACER TRAVELMATE 8371

[. . . ] Please follow the setup instructions of the manufacturer while setting up your monitor. The ventilation openings are used for air circulation to protect the device against overheating. When connecting the device, obey the maximum connected load values of the main power supply. The wall socket must be equipped with a non-fused grounded conductor contact for electrical safety. [. . . ] The power cable must be laid in such a way nobody can trip over it. Please do not place any objects on the cable. Follow all instructions and warning remarks that are printed on the device. If the device will not be used for a long period of time, please disconnect it from the main power supply to avoid power surge damage such as lightning. Make sure no sharp objects or liquids enter the device via its air circulation openings. This could result in a fire or an electric shock. Never open the device casing yourself, there are no user serviceable parts inside. Only authorized technical service personnel should open the casing of this device. If any of the following conditions occur, the device must be disconnected from the main supply, and be checked by a qualified service center: a- Power cable or power plug are damaged; b- Liquid has entered the device; c- The device was exposed to moisture; d- The device does not operate according to the user's guide, or you do not achieve any improvement with the aid of this guide; e- The device has been dropped and/or the casing is damaged; f- The device shows obvious signs of a defect. Use only approved original spare parts, or parts in accordance with the original parts, for repairs. Using state-of-the-art electronics, this monitor supports a 1280 x 1024 resolution. The on-screen display allows you to customize the display settings to suit your individual taste. Features 15-inch monitor with a large, viewable screen for comfortable viewing. OSD user controls for easy and accurate adjustment of the screen image. Energy Star compliant for reduced power consumption. Package Overview Please make sure the following items are in the packing it was shipped in, and found in good working condition: 15" Monitor Power Cord Tilt and Swivel Base This User's manual Please contact your dealer or nearest service centers if any of the above items is missing or damaged. 6 Installation 1. 2. Connect the monitor signal cable 1 to the 15-pin mini D-sub (VGA) on the back of the computer. Connect the power cord to the power connector on the back panel of the monitor, then plug the other end into an electrical outlet that is easily accessible, and close to the monitor. First turn on the power of the computer, then that of the monitor. Adjust the tilt of the swivel base for maximum viewing comfort. 3. 4. The installation of your monitor is now complete. 7 User Controls Control Power Switch Power LED Indicator OSD ON/OFF Control Function Turns the monitor on Green- On Amber- Sleep Turn the OSD Display ON or OFF Brightness Control/ OSD Function selection Contrast Control/OSD Function adjustment Adjust Brightness level or OSD Function selection Control Adjust Contract level or OSD Function Level Control 8 Adjusting the Brightness and Contrast To adjust the contrast and/or brightness, Press the Contrast Control or the Brightness Control, to call up the following on-screen display: OSD Function Description 1. Use the function. to display the OSD Menu. button until the function you want is button to increase or decrease the adjustment of this 4. [. . . ] Use the function. to display the OSD Menu. button until the function you want is button to increase or decrease the adjustment of this 4. If you want to exit the OSD function then press the OSD On/Off control button once. 9 OSD Icon Summary Icon Function Brightness Contrast H. Position Pincushion Trapezoid Rotation Parallelogram Reset Degauss Function Description Adjusts display brightness Adjusts display contrast Increases and decreases screen width Shifts display image right or left Increase and decrease screen height Shifts display image up or down Adjusts concave and convex portion of pincushion effect Adjusts the top and bottom display widths Adjusts the rotation of the display clock or anti-clockwise Adjusts the tilt of the display sides to the left or right Resets to default values Demagnetizes the screen to reduce color impurities 10 Specification Screen Size Dot Pitch (mm) Surface Viewable Image Area 15" CRT 0. 28 Non ­glare 260 x 195 RGB Analog 0. 7Vp-p/75 Ohm Separate H/V, TTL(+/-) 30-70 50-120 1280 x 1024 15-pin mini D-sub Input Signal Video Sync. Scanning Frequency Horizontal (KHz) Vertical (Hz) Max. Resolution Signal Cable Power Consumption Power Supply Max. [. . . ]