User manual ACER TRAVELMATE 8372ZG

[. . . ] Record the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number, and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated. TravelMate 2100/2600 Series Notebook Computer Model Number : __________________________________ Serial Number: ___________________________________ Purchase Date: ___________________________________ Place of Purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. [. . . ] See your card manual for details. 36 2 Customizing my computer English Ejecting a PC Card Before ejecting a PC Card: 1 2 3 Exit the application using the card. Left-click on the Safely Remove Hardware icon on the taskbar and click on the PC Card item. Press the slot eject button (1) to pop out the eject button; then press it again to eject the card (2). 37 Upgrade options Your computer delivers superior power and performance. However, some users and the applications they use may demand more. This computer allows you to upgrade key components when you need increased performance. English Note: Contact your authorized dealer if you decide to perform a key component upgrade. Memory upgrade Memory is expandable to 2 GB, employing DDR 266/333 256MB/512MB/ 1GB SDRAM modules. There are two memory slots on your computer, one of which is occupied by standard memory. You can upgrade memory by installing a memory module into the available slot, or replacing the standard memory with a higher-capacity memory module. 38 2 Customizing my computer English Installing memory Follow these steps to install memory: 1 Turn off the computer, unplug the AC adapter (if connected) and remove the battery pack. Then turn the computer over to access its base. Remove the screw from the memory cover (1), then lift up and remove the memory cover (2). 2 3 Insert the memory module diagonally into the slot (1), then gently press it down until it clicks into place (2). 4 Replace the memory cover and secure it with the screw. The computer automatically detects and reconfigures the total memory size. 39 Using system utilities Notebook Manager The computer has a built-in system setup program called Notebook Manager. The Windows-based Notebook Manager allows you to set passwords, the startup sequence of the drives, and power management settings. It also shows current hardware configurations. Use the arrow keys to scroll through the items (operating system versions) and press "Enter" to select. Setup password and exit Press "F3" to setup password or press "F5" to exit the system recovery process when "Acer Self-Configuration Preload" window appears. If "F3" is pressed, the next screen shows "Please enter new password:" enter one to eight alphanumeric characters. You will be asked to reenter your password for confirmation before continuing. The screen will display "Password has been created. Press any key to reboot. . . ", hit any key to reboot your system. If "F5" is pressed, the recovery process will be terminated and the system will reboot and start normally. Important: This feature occupies 2 GB in a hidden partition on your hard drive. 3 Troubleshooting my computer This chapter instructs you on how to deal with common system problems. Read it before calling a technician if a problem occurs. Solutions to more serious problems require opening up the computer. Do not attempt to open the computer by yourself. Contact your dealer or an authorized service center for assistance. 45 Frequently-asked questions The following is a list of possible situations that may arise during the use of your computer. Easy answers and solutions are provided for each one. English I pressed the power switch and opened the display, but the computer does not start or boot-up. Look at the Power indicator: · If it is not lit, no power is being applied to the computer. [. . . ] This has no effect on the recorded image and does not constitute a malfunction. Macrovision® copyright protection notice This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. [. . . ]