User manual ACER X1213

[. . . ] Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Acer Projector X1213/X1260 Series Model number: __________________________________ Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. [. . . ] Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees). Automatically synchronizes the projector to the input source. Press "SOURCE" to choose RGB, Component, S-Video, Composite and HDTV sources. 5 # 12 13 14 Icon Function HIDE Empowering key FREEZE Description Momentarily turns off the video. Press "HIDE" to hide the image, press again to display the image. Unique Acer functions: eView, eTimer Management. To pause the screen image. English Note: Remote Control Placement Please refer to the illustration to attach the remote control to the projector. 6 English Getting Started Connecting the Projector VGA D-Sub 2 USB RS232 RS232 4 7 D-Sub 6 2 D-Sub USB D-Sub Y 1 5 3 Y Video Output S-Video Output # 1 2 3 4 Power cord VGA cable Description # 5 6 7 S-Video cable RW Description Audio cable jack/jack RS232 cable Composite video cable USB cable Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. 7 Turning the Projector On/Off Turning on the Projector 1 2 3 4 Remove the lens cap. (Illustration #1) Ensure that the power cord and signal cable are securely connected. Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue. (Illustration #2) Turn on your source (computer, notebook, video player , etc. ). The projector will detect your source automatically. · If the screen displays "Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. If the screen displays "No Signal", please make sure the signal cables are securely connected. Press "MENU" on the remote control, the screen will return to the main menu. To exit OSD, press "MENU" on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Main manu Setting Sub manu 16 English Color setting Display Mode There are many factory presets optimized for various types of images. · · · · · · Brightness Standard: For common environment. Video: For playing video in a bright environment. Blackboard: Blackboard mode can improve displayed color when you project onto darker surfaces. Utilizador 1: Memorize user's settings. Utilizador 2: Memorize user's settings. to lighten the image. Adjust the brightness of the image. · · Contrast "Contrast" controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. · · Color Temperature Degamma Color R Color G Color B Saturation Press Press to decrease the contrast. to increase the contrast. Adjust the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · · · · Reorient or relocate the receiving antenna. [. . . ]