User manual ACESONIC KM-112

[. . . ] Please do not use volatile gasoline or other chemicals to clean the receiver or microphone. Avoid Moisture, Water and Dust · Do not place the mixer in a moist environment or in an area where there might be an excessive amount of dust build up (e. g. , near a fan). 3. You can use two XLR inputs to plug in mics, guitars, etc. Advance digital sound enhancement technology improves the full range of audio frequencies to fine-tune the sound of your musical output. [. . . ] Microphone tone and echo controls: Use the bass and treble tone controls to adjust the tone of both microphone channels at once. Use the echo control to adjust the level of the echo effect in relation to the volume of the microphone(s). Music volume control: Use this control to adjust the playback volume of the music. Note: This control does not adjust volume of the microphones or effects. 8. Multiplex switch: Choose L, R or Stereo with this switch. This allows you to cancel the channel with the guide vocals. 4. Headphone/alternate speaker output: Plug in your headphones or alternate (powered) speakers here. Headphone volume control: Control the volume of the headphones or alternate speakers here. 9. Computer/audio button: Use this button to select whether you want to use the KM-112 as an audio mixer (Audio) or as a USB interface (USB) to record vocals on your Windows computer. 3D sound processor button: Use this to turn the 3D sound enhancer on/off. 1 2 3 4 5 6 7 8 9 10 Technical Specifications · Size: 11. 5 (L) x 7. 75 (W) x 1. 75 (H) in inches, · 3. 2 lbs. net weight · PC to KM-112 USB connection · (2) XLR audio inputs (balanced, rear) · RCA audio inputs (2, rear) · RCA audio outputs (2, rear) · KM-112 has an integrated C-Media CM106 Audio I/O Controller · (2) 1/4-inch audio inputs (unbalanced, front) · Mini-jack audio out (1, front) · Voltage: Switchable 115~230V (rear) · Adheres to FCC regulations (see page 7) 3 Rear Panel Operation and Functions 1. XLR balanced inputs: With these inputs you can connect a balanced microphone, the output jack of a wireless microphone or an electric guitar with balanced output. Audio out: Connect this RCA type line level output to the input of an amplifier or powered (active) speaker system. Audio line input: Line level audio input using RCA type connectors. This can accept a signal from any line level audio device, such as DVD, CD, MD, PC, MP3/ MP4 players, etc. USB cable connection: Use this USB cable to con- nect KM-112 to your computer for audio in and out. Please use the USB cable that comes with your KM112 and connect it first. The driver of KM-112 will automatically install into your Windows computer. After installing the driver, please restart your computer to activate the driver (Windows) and register the device with Device Manager to use both the mixer and the USB interface functions . Voltage switch: Select the power supply voltage for the KM-112 according to your local power supply (115V-230V). Default settings are 115V for USA and Canada, 230V for Europe. Power cable connector: Use this to connect the power cord to supply AC power to the unit. 1 Recording and Playback with Computer 2 3 4 top 5 bottom 6 · On your Windows PC, the driver automatically installs when you connect and power up the device. [. . . ] Following any servicing or repair of this product, ask the service technician to perform the appropriate safety checks to ensure the product is in proper operating condition. The product should not be mounted to a wall or ceiling except as recommended by the manufacturer, with a mounting accessory recommended by the manufacturer. If your product is not operating correctly or exhibits a marked change in performance, and you are unable to restore normal operation by following procedures in this User Manual, do not attempt to service it yourself. Opening the enclosure may expose you to dangerous voltage or other hazards. [. . . ]