User manual ACESONIC UHF-1208X

[. . . ] The Leader in Professional Equipment UHF-1208X DUAL DIVERSITY 100 CHANNELS UHF WIRELESS MICROPHONE SYSTEM USER'S MANUAL NOTE: To ensure this component will work safely and to its fullest potential, please read this user's manual carefully before operation and keep for future reference. www. acesonic. com Warnings, Cautions and Others Mises en garde, precautions et indications diverses CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. For Canada/Pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, AND FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. For Canada/Pour le Canada THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE " EMISSIONS FORM DIGITAL APPARATUS AS"SET OUT IN THE INTERFERENCE-CAUSING " EQUIPMENT STANDARD " ENTITLED DIGITAL APPARATUS, ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS. [. . . ] Refer all servicing to qualified service personal. 3 Acesonic UHF-1208X Thank you for purchasing Acesonic's UHF-1208X. Acesonic takes pride in providing our custmers with only the most advanced and highest quality karaoke products on the market. Please read trough this USER'S MANUAL before operation to ensure proper usage, and keep for future Table of Contents Warnings and Caution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Included Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Receiver/Display panel Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Microphone Descriptions/Operation/Channel Switching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installation & IR SYNCing(channel switching). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Features & Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Manufacturer Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Parts checklist Before installing your wireless microphone, Here are a few things you should do/know: l microphone(2) Handheld l brackets(1 Set) Mounting l adapter(1) AC power l UHF-1208X receiver (1) 3 ft. male l to male ¼" cable (1) l Antenna(2) l User manual / warranty card *Be sure to keep original packaging in case of re-shipping is needed. Matters Need Attention 1)Check to see whatever the local voltage accord with operating receiver voltage(Wrong selection may lead to burn out of receiver) 2)Do not dismantle the machine on your own. For internal repair, please contact the local distributor or accepted service center. 3)When the machine will not be used for a long time, please disconnect the power plug from receiver. 4)Do not recharge your batteries until the batteries are low. Cleaning lmake sure the power is disconnected before cleaning or repairing the machine. Please l The machine can be cleaned by using a soft cloth with water. Dry the machine with a dry cloth and let it air dry for 15 minutes. ldo not use volatile gasoline, diluents or other chemicals to cleaned the machine Please 4 Receiver Descriptions 4 2 1 3 1) Power switch -Turns the UHF-1208X on and off. 2) RF & AF indicator- RF indicator shows radio frequence signal level which receiver is getting. AF indicator shows the audio frequence signal level from the microphone. If receiver catches microphone's signal, the RF & AF indicator will show the signal level 3)Channel A display panel - Display all information like the frequency channel of the microphones, channel scanning information, or channel lock/unlock 4)Channel A volume control knob - Adjust the volume on the microphone A. 5)Channel A operating buttons: IR SYNC/UP button: press twice in the roll to start IR Syncing process. turn on the microphone and press the microphone button again shortly to complete the channel matching between receiver and microphone. Or you can use this button as UP button in MENU mode. STOP/MENU button: use this button to stop channel scanning, the receiver will automatically select the best/cleanest channel from all channels scanned. You can also use this button to enter MENU mode: In MENU mode, there are four categories: 1. Frequency: use UP or Down button to manually select receiver channel. 2. Scan: use to start auto channel scanning process. [. . . ] Power on the microphone handheld and use its button part to face the IR SYNC laugher on the receiver front panel to prepare the next step(IR syncing). On the receiver, press IR SYNC button twice in the roll to start IR syncing process. When the receiver LCD screen shows IRING, press microphone button and release shortly. If IR SYNC success, the LCD screen will show IR OK. [. . . ]