User manual ACR ELECTRONICS NAUTICAST AIS INLAND

[. . . ] Please read this first! Warning: Although ACR strives for accuracy in all its publications; this material may contain errors or omissions, and is subject to change without prior notice. ACR shall not be made liable for any specific, indirect, incidental or consequential damages as a result of its use. ACR components may only be used in safety of life devices or systems, with the express written approval of ACR, as the failure of such components could cause the failure of the ACR device or system. If these fail, it is reasonable to assume that the safety of the user or other persons may be endangered. [. . . ] ++++++++++++++++++++++++++++++++++++++++ ---------------------------------------| | | | <-Exit GPS Antenna Mounting It is important to input the exact mounting position of the GPS Antenna on the vessel as this influences the accuracy of the displayed target in an ECDIS. (RefPntExt:) = The position of any external positioning device (GPS Antenna) used as primary position source. (RefPntInt:) = The position of the GPS Antenna (fallback device in case primary source is disabled). NOTE: When receiving position data from large vessels, it should be considered that the position refers to the antenna mounting point upon the vessel. To ensure accurate navigation, the antenna reference points (see Other Vessels Details) should be taken into consideration when determining the vessels position. Also, the electronic chart display in use should be programmed to consider the antenna reference points. Traffic images are represented in true distances only when all displayed targets, including own vessel, are working with AIS position information, which considers antenna reference points. Y1-03-0211G 49 3. 5. 5 Transponder Configuration (User Password Protected) The Configuration Menu allows the user to alter the hardware-based parameters. User Password Configuration is also undertaken here. Accessing the Configuration Settings: The Configuration Menu is User Password protected. NOTE: Please see Appendix 7. 3 for password information. N48^12' E 16^26' |1>0. 00|2>0. 00|3>0. 00nm |---------------------------------| 5. Transponder Configuration -----| | | +- 1. Inland AIS Configuration -----| | Displ| ---------------------------------------NUM|Select->| | |<-Back Dynamic Keys: Transponder Configuration [M5] [Select] Select desired [M8] Submenu [Back] Return to Main Menu Accessing the Configuration Menu (Please see Appendix 7. 3 for password information) The letters of the Password appear as * when being input on the screen. N 1o18' E 0o12' |1>0. 10|2>1. 30|3>1. 80nm ---------------------------------------++++++++++++++++++++++++++++++++++++++++ User password protected!Please enter user password: **** ++++++++++++++++++++++++++++++++++++++++ ---------------------------------------| Enter | | | Exit Dynamic Keys: Input of Default User Password to Access Configuration [M5] [Enter] Confirm Default User Password Input [M8] [Exit] Return to Vessel Listing 50 Y1-03-0211G Incorrect User Password Input If the incorrect User Password is input, the screen below appears. N 1 o34' E 0 o27' |1>0. 10|2>1. 30| * 1A1L ---------------------------------------- ++++++++++++++++++++++++++++++++++++++++ Access denied!++++++++++++++++++++++++++++++++++++++++ ---------------------------------------| | | | <-Exit Dynamic Keys: User Password Input (Access Denied) [M5] [Exit] Return to Vessel Listing a) Change User Password (for initial NAUTICASTTM Operation) It is strongly recommended to change the default User Password upon initial NAUTICASTTM operation. The new User Password can be between 6 - 8 characters in length, and is not case sensitive. N48^12' E 16^26' |1>0. 00|2>0. 00|3>0. 00nm |---------------------------------| 5. Transponder Configuration -----| | | +- 1. Inland AIS Configuration -----| | Displ| ---------------------------------------NUM|Select->| | |<-Back Y1-03-0211G 51 N 1 o33' E 0 o27' |1>0. 10|2>1. 30| * 1A1L ********* Change User Password ********* Enter new password: Repeat new password: ***** ***** {Length: 6. . 8 characters} ---------------------------------------| Enter | | | Back Dynamic Keys: Initial User Password Setting [M5] [Enter] Confirm User [M8] Password Input [Back] Return to Menu Configuration This screen appears if the new User Passwords are mismatched - i. e. the New User Password and the Repeated New User Password are not identical. In this case, it is possible to re-input both the New and Repeated User Passwords again. [Exit] takes the user back to the User Password Input Screen. N 1 o19' E 0 o13' |1>0. 10|2>1. 30|3>1. 80nm ---------------------------------------- ++++++++++++++++++++++++++++++++++++++++ Passwords mismatched!++++++++++++++++++++++++++++++++++++++++ ---------------------------------------| | | |<-Exit Dynamic Keys: User Password Input (Password Mismatched) [M5] [Exit] Return to Password Input Screen 52 Y1-03-0211G The new User Password configuration has been saved. N 1 o33' E 0 o27' |1>0. 10|2>1. 30| * 1A1L ---------------------------------------- ++++++++++++++++++++++++++++++++++++++++ Data saved. ++++++++++++++++++++++++++++++++++++++++ ---------------------------------------| | | | <-Exit b) Region Settings A Region is a defined area, with specific VHF parameters, which are sent out by Vessel Traffic Service Stations (VTS), and received via Digital Selective Calling (DSC) or AIS. [. . . ] 78, 20359 Hamburg, Germany Inland AIS Type Approval Certificate No: R - 4 - 203 Issued by: Fachstelle der WSV für Verkehrstechniken Weinbergstraße 11-13, 56070 Koblenz, Germany IMO MSC. 74(69) Annex 3 ITU-R M. 1371-3 (Class A) IALA Technical Clarifications of Rec. 1. 3) ITU-R M. 825-3 ITU-R M1084-3 IEC 61993-2 (2001) IEC 61162-1 (2000), -2 (1998) IEC 60945 (1996) IEC 61108-1 (1996) Technical Specification for Vessel Tracking and Tracing Systems for Inland Waterways (Ed. 1. 01 dated 10. 10. 2007) Test Standard for Inland AIS, (Edition 1. 0 dated 31. 5. 2007) 2009-08 ACR Electronics Inc. , 5757 Ravenswood Road, Fort Lauderdale, Florida, 33312 USA ACR Electronics Europe GmbH Handelskai 388 / Top 632 A-1020 Vienna, Austria Vienna, 2009-07-22 Zertifikate der benannten Stelle: Certificates from the notified Body / Certificats des Organismes Notifiés Spezifizierte Standards: Specified Standard(s) / Standard(s) Spécifié(s) Dokumentennummer: Document number / Num. du document Hersteller: Manufacturer / Fabricant Anschrift EU-Vertretung: Address EU-Representative / Adresse du Représentant pour l'UE Ort, Datum: place, date / Lieu, Date Unterschrift: Signature / Signature Andreas Lesch Managing Director Diese Erklärung bescheinigt die Übereinstimmung mit den genannten Richtlinien, ist jedoch keine Zusicherung von Eigenschaften. [. . . ]