Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ACRON SK1L LCD KEYPAD. We hope that this ACRON SK1L LCD KEYPAD user guide will be useful to you.
Lastmanuals help download the user guide ACRON SK1L LCD KEYPAD.
Detailed instructions for use are in the User's Guide.
[. . . ] Dimensions: 6 1/2" x 4 5/8" x 1" Current Consumption: 80 mA minimum, 100 mA maximum each unit The material in this publication is for informational purposes only and is subject to change without notice. assumes no responsibility for any error which may appear in this publication.
MOUNTING INSTRUCTIONS
1) Remove the SK1L from the packing box and verify that all the contents are there: SK1L Keypad SK1L Installation Manual SK1L Owner's Manual 2) The front and rear covers snap together and can be easily separated for installation. [. . . ] If you are using partitioned mode in the SC800 / 1600 then you must set the keypad address to match the partition to which it is assigned. Refer to the SC800 / 1600 installation manual for instructions on Partitioned mode. If you choose you can also modify the text messages. Older SK1L keypads do not have programmable text messages and the keypad address is the only programmable location.
2
CHANGING DATA OR TEXT THROUGH THE KEYPAD
1) Enter the following sequence at the keypad to activate keypad programming mode:
[*&0]+[IIII]+[9]
[ * & 0 ] = Pressed simultaneously [ I I I I ] = Installer's code (factory default = 7777) programmed into control panel. 2) When you enter programming mode you will be at location 0. This is indicated by the top line in the display saying PROGRAM# followed by #0 the actual memory location. The current data in that address is displayed at the left on the second line of the display after you press [ # ]. 3) Using the [ * ] key you can switch the cursor back and forth between the "program#" value and the "data" value. To change the memory location put the cursor on the "program#" value using the [ * ] key and enter a new three digit memory location, i. e. To change the data put the cursor on the data value using the [ * ] key and then enter new data . [. . . ] You must use the correct keypad number when in partitioned mode to assign the keypad to the partition you intend. The above procedure specifies keypad programming only. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ACRON SK1L LCD KEYPAD
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ACRON SK1L LCD KEYPAD will begin.
