Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ACT SMARTLOCK. We hope that this ACT SMARTLOCK user guide will be useful to you.
Lastmanuals help download the user guide ACT SMARTLOCK.
Detailed instructions for use are in the User's Guide.
[. . . ] SmartLock Installation Instructions
The SmartLock improves the security of ACTSmart2 installations by allowing the installer to locate the lock control relay inside a secure area. The SmartLock learns an ID code from the ACTSmart2 and only operates its' relay when a valid card or PIN is presented to the ACTSmart2. [. . . ] This prevents a short from +12V to 0V on the ACTSmart2 side of the door from deenergising the Maglock. Ensure that the Door Release wires are not accessible to an attacker. The Data line from the SmartLock to the ACTSmart2 must be less than 30m. Connect the ACTSmart2 and the SmartLock as in the diagram below and power up. The red LED on the SmartLock will be on steady. Program one of the AUX I/Os on the Smart2 for SmartLock operation. For AUX I/O 2 enter followed by the programming code (default code is 9999) and 5211 . The red LED on the SmartLock flashes every second. Press and hold the Programming button until the LED flashes rapidly. Remember to change the other AUX I/O and the Programmable Input from Door Release Button. To set the Programmable Input to Door Contact enter then the programming code and 500 . To set AUX I/O 1 to Door Alarm enter followed by the programming code and 5108 . [. . . ] E-mail: sales@accesscontrol. ie Web: www. accesscontrol. ie 30-00030
OMO RN 5A 5A
RO N 1A 125V
+
12-24V DC/AC 0V N/O COMM N/C
12-24V DC/AC 0V
Push Button
Tamper
N/O COMM N/C
Door Release Button
SmartLock
Important!Always Place Varistor Across Lock Terminals [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ACT SMARTLOCK
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ACT SMARTLOCK will begin.
