User manual ACUMEN 10K STEPPER PLUS

[. . . ] 10K Button (Countdown from 10, 000 to 0 steps) - Press once to switch ON the 10, 000 steps feature in any mode when the stopwatch is running (indicated by " " icon on the screen and two beeps). - Press once again to switch it OFF in any mode when the stopwatch stopped. Distance Mode You may enter your own stride length in this mode. IV. HOW TO OPERATE YOUR 10K STEPPERPlus Buttons and Functions F Button (Function) - Press repeatedly to change the different modes; To proceed to the next item in the setting mode. - Press and hold to enter the setting mode. [. . . ] You can display the time whenever you wish without affecting the recording of the unit. - Press STR/STP button once to start or stop the stopwatch in any mode (Indicated by the running man icon on the screen). Steps/10, 000 Steps Mode People will benefit from walking/running 10, 000 steps every day according to a scientific research. The 10, 000 steps feature directly displays how many steps you will have to go to attain your 10000-step goal. When it counts down to zero, the pedometer gives a long beep for indication, and also stops recording all data of your exercise. In sync, the unit automatically displays Stopwatch Mode. You may only restart by pressing and holding R/S button. - Press F button repeatedly to enter Steps Mode. - Press and hold F button until the digit blinks in this mode; Adjust weight by pressing STR/STP button. - Press F button again to exit the setting mode and your weight is locked in. Note: The unit will exit the setting mode automatically if no button is pressed for 60 seconds. VI. CHANGING THE BATTERY Use a coin to open the battery cover. Remove the cover and replace the battery. When finished, turn the cover clockwise until it locks in place. The unit will enter Shelf Mode, which will show a blank screen. You will need to reset the time and your personal data as these have been erased. Battery Type: Lithium CR 2032 Battery Life: Approximately 1. 5 years Or - Press 10K button once to switch ON the 10, 000 steps feature when the stopwatch is running. - Press 10K button again to switch it OFF when the stopwatch stopped. V. SWITCHING BETWEEN MILES AND KM The Miles/Km switch is located inside the battery compartment. To change the unit setting, remove the battery and use a pen to set your desired unit. See below figures. Battery Door Unit Switch Mi Km VII. CARING Plus FOR YOUR 10K STEPPER · Do not drop the unit. · Do not expose the unit to moisture or high humidity. · Do not expose the unit to high temperatures. Calorie Mode The unit automatically calculates the calories expended in your exercise according to your weight. workmanship and material. [. . . ] First visit our website at: www. acumeninc. com/support. htm to obtain a Return Authorization Number. Enclose your name, address and phone number. Enclose the date of purchase (or receipt as a gift). An explanation of the malfunction or reason VIII. [. . . ]