User manual ADAM AUDIO SUB8

[. . . ] First of all, we would like to thank you for choosing ADAM Audio! aDAM Studio Subwoofers are built to a maximum in reproduction quality and perfection. [. . . ] Toprevent shock hazard, all three components must always be used. After having unpacked your subwoofer, please allow the system to acclimate to the temperature of the room. Decrease the volume of your audio system to protect your speaker and ears from damage when switching the system on. By increasing the volume from your audio system, you should now hear sound. â· To achieve the best possible sound reproduction, please see the following considerations for speaker placement. Please note: these settings do not have a precise character, as different satellites and different room acoustics lead to results that cannot be foreseen indeed. In the majority of cases there is the danger of boominess, if you take the same say 85Hzforboththesatelliteandthesubwoofer. Mode ThispushbuttongivesachoicebetweenSignal On: woofer starts operation as soon as a musical signal arrives, and stops after 15 minutes without a signal. Thereisno"right"or"wrong"position, youhavetofindoutbyyourselfwhatsounds better, more exactly and more homogeneous in the low end. If you switch the filter in or out, it often becomes necessary to switch the phase as well - try it out please! Input - Balanced and Unbalanced Thesestereojacks-XLRinthebalanced(alsonamed:symmetrical), Cinch or RCA in the unbalanced (also named: asymmetrical)case, shouldbeconnectedtotheoutputof your mixing console or stereo/surround sound system. Final recommendation: After using the set up a few times we recommend to test the position of the controls again. [. . . ] How to claim repairs under warranty Shouldserviceberequired, pleasecontact the ADAM Audio dealer where the product has been purchased. All data subject to change without prior notice. [. . . ]