Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ADDONICS CCMS1-ES. We hope that this ADDONICS CCMS1-ES user guide will be useful to you.
Lastmanuals help download the user guide ADDONICS CCMS1-ES.
Detailed instructions for use are in the User's Guide.
[. . . ] ADDONICS TECHNOLOGIES
Model: CCMS1-ES
CipherChain-e Basic Hardware Installation 1. 2.
Device SATA port (Connect to SATA device)
3.
4-pin floppy power connection Disable reset switch jumper
4.
Mount the CipherChain-e into the 3. 5" drive bay on PC case. [. . . ] Observed that the green Power LED should light up. If it does not, re-insert the cipher key and re-power the devices or reset the CipherChain-e. For new drive, go to the operating system's management utility to partition, format and mount the encrypted drive. Go to File Manager and view the encrypted drive. Note: You may remove the cipher key from the CipherChain-e once the CipherChain-e is powered on. All the files being transferred into the drive are still encrypted even if the cipher key is removed.
Reset switch HDD LED
Power LED Cipher keyhole
Disable reset switch jumper By default, CipherChain-e reset switch is enabled. Disabling the reset switch is recommended if the CipherChain-e is connected to a boot drive or nonhotswap SATA controller card. Reset switch Under certain applications, the RESET button enables the adding and removing of hard drives without restarting the system. Following is an example of such an application: a. When the CipherChain-e is connecting a removable drive system to a SATA port that supports hot swap, the drive can be removed without powering off the computer. However the drive icon will still be there as the system does not realize a hard drive is removed from the system. In addition, the key code still resides inside the CipherChain-e. Resetting will turn off the CipherChain-e, clear the key code and remove the drive icon. We recommend resetting the CipherChain-e whenever a hard drive is removed from a system to ensure better security.
Best Practices: Create a label to identify the SATA storage device and the Cipher key used to encrypt the device. [. . . ] If the power LED does not light up, the system will not detect the hard drive connected to the CipherChain-e. Yellow Power LED: Lights up when there is drive activity. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ADDONICS CCMS1-ES
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ADDONICS CCMS1-ES will begin.
