User manual ADOBE ACROBAT READER 4.0

[. . . ] If the author of a PDF file embeds CJK fonts in the document, then any language version of Reader 4. 0 will be able to display the CJK text on any system without additional software. If the author uses CJK fonts but does not embed them in the document, then you will need access to the correct Asian fonts in order to view the PDF file on non-native systems. All you need to do is install the appropriate Asian font pack for use with Acrobat Reader. The Asian Font Packs are available on the Adobe Acrobat 4. 0 Product CD, or from Adobe's web site at: http://www. adobe. com/prodindex/acrobat/cjkfontpack. html STSongTM is a trademark of ChangZhou SinoType Technology Co. , Ltd Troubleshooting Issues Using Acrobat 3. 0 or Acrobat Reader 3. 0 to view and print files created in Acrobat 4. 0 You can use Acrobat 3. 0 or Acrobat Reader 3. 0 to view and print PDF files created with Acrobat 4. 0, taking note of the following. [. . . ] To resolve this issue: * In the Start Menu, select Settings, Control Panel and look for "Internet". * If you have an Internet Control Panel, double click on it and go to the Connections Tab. Verify the settings in the tab are properly configured for your environment. ( You can verify this outside Acrobat by attempting to use Internet Explorer to access the Web. Note: Netscape Navigator does not use the Internet Control Panel) * If you do not have an Internet Control Panel, you may obtain one by installing a copy of Microsoft Internet Explorer 3. 0 or later. [282722] Tips for printing PDF files to low memory printers If you are printing a PDF file to non-PostScript printer with a small amount of RAM (for example, 2 MB), the printer may run out of memory. If this occurs, you have three options: * In Acrobat Reader's Print dialog, select Properties and change the print resolution to something lower, like 300 dpi. * Use the "Print as image" setting in Acrobat Reader`s Print dialog. [285296] Using the Print As Image option may eliminate printing problems If Acrobat Reader fails to print a file correctly, try selecting the Print As Image option in Acrobat Reader's Print dialog. This option, which tells Acrobat Reader to send a 300 dpi raster image to the printer rather than vector art, may enable troublesome files to print. This option is not, however, recommended for general purpose use because it may make many PDF files print slower. [289026] How to make sure PDFs with custom page sizes print as expected The default Acrobat Reader printing behavior is to scale the PDF page to fit the paper size. If you do not want your PDF scaled to the current paper size, follow these steps. In Acrobat Reader's print dialog, uncheck Fit To Page, then select Properties and choose the correct paper size. How to make sure N-up printing works in Acrobat Reader If N-up printing does not work in Acrobat Reader, you probably do not have the AdobePS printer driver on your system. If you print from Acrobat Reader using the Microsoft PSCRIPT PostScript printer driver, which is the likely scenario if you do not have the AdobePS driver installed, Acrobat Reader's N-up printing option does not work. The N-up printing option, which allows you to print multiple pages on one page, is only available if you print from Acrobat Reader using the AdobePS printer driver. AdobePS can be obtained from the Adobe web site on the Adobe Products page under Adobe Printing Technologies. [284943] Printing Even/Odd pages and Reverse pages do not work together [296097] PDF pages printed on PCL printers may not be centered Certain DeskJet and other non-PostScript printers have printer drivers that do not have consistent margins all the way around the page. The left and right values generally are equivalent, but the top and bottom are sometimes quite different. [. . . ] [296078] The AdobePS 4. 2. 4 driver can only print 255 pages at one time Acrobat Reader will only be able to print 255 pages at one time when printing with the AdobePS 4. 2. 4 PostScript printer driver. [281591] PostScript Level 1 printing issues Acrobat 4. 0 PDFs which contain LAB based ICC images may not print correctly when printed to PostScript Level 1 printers. To assure proper printing of these high quality color PDFs, print them to a PostScript 3 or PostScript Level 2 printer. Some PostScript printing options have limited availability in Acrobat Reader The PostScript printing options Print Mirror Image, Print Negative Image, Flip Horizontal or Vertical, and Invert Image are only available in Acrobat and Acrobat Reader if you check the "Print as Image" option in the print dialog. [. . . ]