User manual ADS TECH PYRO AV LINK

[. . . ] 8 Dub video from an Analog device to a Digital recorder or from a Digital deck or camcorder to an Analog video tape machine . ADS Technologies respects the rights of copyright owners and asks that you do the same. The Copy Right Act gives owners of copyrights the exclusive right to reproduce and prepare derivative works as well as to publicly perform, display and distribute their works. This means that you must obtain permission to engage in any of these activities when using works that are copyrighted by another person. [. . . ] PYRO A/V Link can operate as a stand a lone conversion device between analog and digital recording devices. This means you can convert analog content into DV content via a direct conversion to a DV deck or a Digital camcorder without connecting either device to a computer ) Connect the RCA audio and video cables between your analog video device and the RCA audio and video inputs on the front of the PYRO A/V Link unit. ) Use the S-VHS or Component video inputs if your analog video device has these connections for the best possible video quality. ) Use a 6 Pin to 4 Pin 1394 cable to connect from the A/V Link to your digital camcorder or DV deck. Connect the 6 pin end of the cable to the 6 pin 1394 connector on the rear of the PYRO A/V unit and connect the 4 pin end to your digital camcorder or DV Deck. In this mode, the RED LED should be lit. ) Press the RECORD button on your digital camcorder or DV deck just before pressing the PLAY button on your analog video device (VCR or Camcorder). You can easily connect a TV to the audio video output jacks on the PYRO A/V Link to monitor your video dubbing process. ) Connect an RCA or S-VHS video cable between the PYRO A/V Link and your TV RCA or S-VHS Video input jacks. ) Connect Right and Left audio cable between the PYRO A/V Link Right and Left audio jacks and your TV audio inputs. If you have a digital camcorder you can use the PYRO A/V Link to convert the digital content into an analog video signal so it can be recorded on your VCR. ) Connect your digital camcorder or DV deck to the 4 pin DV In jack on the front of the PYRO A/V Link. ) Connect a video cable from the RCA or S-VHS OUT jacks on the back of the PYRO A/V Link and into an external video input (RCA or S-VHS) on your VCR Note: S-VHS provides a higher quality video recording than an RCA cable. S-VHS is recommended if your camcorder or VCR offers this connection. ) Connect an audio cable to the Left and Right RCA audio OUT jacks on the back of the PYRO A/V Link to the external audio inputs (RCA) on your VCR. Note: If you are recording back to a camcorder, you may need to use the cables provide by the camcorder manufacturer. In this mode, the BLUE LED should be lit. ) Apply Power to the VCR and press RECORD just before you press PLAY on your digital camcorder. You can preview and record video to a VCR at the same time as long as the VCR allows for audio and video to be passed through it. Check and test your VCR to ensure that it has audio and video inputs and outputs and they allow pass through of audio and video while recording. ) Connect a video cable from the RCA or S-VHS OUT jacks on the back of the PYRO A/V Link and into the Video In on your VCR. ) Connect an RCA or S-VHS cable to the Video Out on your VCR to an external video input (RCA or S-VHS) on your TV. [. . . ] Once the product is received at the factory it will be tested and then repaired or replaced. Product comes with a One (1) year hardware warranty. (ADS) warrants this product against defects in material and workmanship for a period of One (1) year from the date of original purchase from ADS or an authorized ADS dealer. This warranty applies only to the original purchase of the product and is not transferable. [. . . ]