User manual ADVANCE MAT-605

[. . . ] CAUTION: To prevent the risk of electric shock, do not remove cover (or back); no user serviceable parts inside. An appliance and cart combination should be moved with care. Before any transportation, your product must be packed correctly in order to avoid any damage. [. . . ] Exposed to rain: or • The appliance does not appear to operate normally or exhibits a marked change in performance; or • The appliance has been dropped, or the enclosure damaged. SERVICING The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. CLEANING The appliance should be cleaned only as recommended by the manufacturer. POWER LINES An outdoor antenna should be located away from power lines. NON-USE PERIODS The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. OBJECT AND LIQUID ENTRY Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. STANDBY/ON POWER BUTTON Press this button to turn ON your appliance, power is supplied to your unit and it becomes operational, the STANDBY indicator blue light is flickering during one minute and becomes fixe (The main power switch is located on the back panel and must be ON in order to use STANDBY function). When set to STANDBY the main power is cut-off and the unit is no longer fully operational except for the micro controller. The standby indicator red lights during standby. — MENU Press this button to select the MENU CONFIGURATION function. This menu is available at all times by pressing this button. CONTROL RING Control Ring: The ring controls the parameters in the different menus. With this control ring you can move up, down, left and right in the menus. Some menus can be used only in UP and Down mode and others LEFT and RIGHT. MEMORY Memory Button: Press this button to open the memory position that stores a preset location in the tuner. ISOLATING SPIKES Your amplifier used spike-feet, you need to use them with non-skid cupels included. [. . . ] UNBALANCED OUTPUTS (R and L /CINCH) These connections allow you to connect L and R inputs of your integrated amplifier or preamplifier to the outputs (L and R) of your tuner MAT-605. L) If your power preamplifier or integrated amplifier has balanced inputs, you have the possibility to connect it on the balanced outputs of your tuner MAT-605. POWER CORD /MASTER ON/OFF SWITCH / VOLTAGE SELECTOR Before plugging in the amplifier, its master power switch must be in the OFF position. [. . . ]