User manual ADVANCE MPP-1000

[. . . ] VENTILATION DAMAGE REQUIRING SERVICE The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed. Sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. HEAT The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliance (including amplifiers) that produce heat. [. . . ] (The main power switch is located on the back panel and must be ON in order to use STANDBY function). When set to STANDBY the main power is cut-off and the unit is no longer fully operational except for the micro controller. The standby indicator red lights during standby. CD INPUT Press this button to select the CD as your listen source. The audio signal of CD is an analog RCA type connector. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. L de votre préamplificateur MPP-1000 BALANCED CD INPUT If your cd player has a stereo balanced output, you can connect it on the stereo balanced cd input of your preamplifier MPP-1000. Also, you can use this balanced input with others sources like tuner, DVD, etc. TUNER INPUT Press this button to select the tuner as your listen source. The audio signal of CD is an analog RCA type connector. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. BOUTON DE VOLUME VYour amplifier used a rotary type knob to control the 2 channel output sound level (left and right). Turn this volume knob clockwise to increase the ouput sound level and turn this volume knob counterclockwise to decrease the output sound level. The audio signal are analog RCA type connectosr. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. L de votre préamplificateur MPP-1000 BALANCED AUXILIARY INPUT If your source has a stereo balanced output, you can connect it on the stereo balanced auxiliary input of your preamplifier MPP-1000. Also, you can use this balanced input with others sources like tuner, DVD, etc. MUTE Push this button and the sound will stop, push again and the sound will come back. [. . . ] PHONO GROUND Connect the ground cable of your phono on this phono screw. It will eliminate the ground noise generate by the phono. From trigger output of the preamplifier MPP-1000 to trigger input of Advance Acoustic power amplifiers. PHONO INPUT MM AND MC You can connect your turntable on PHONO MM if you are using a moving magnet cartridge (MM) or on PHONO MC if you are using a moving coil cartridge (MC). [. . . ]