User manual AEG-ELECTROLUX 110DKW

[. . . ] If there are limitations please define water quality / type of water that can be used with appliance. This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use. Lorsque le fer est placé sur son support, veillez à ce que la surface sur laquelle est placé le support soit stable. [. . . ] Dry iron on wrong side while still damp or use spray to dampen. Iron on wrong side while still damp or use spray to dampen. Steam can be used under manufacturer's instructions. Steam iron on wrong side or use ironing cloth. Dry iron while still damp or use spray to dampen. Steam iron on wrong side or use ironing cloth. Iron on wrong side or use ironing cloth to prevent shine marks, especially with dark colours. Dry iron while still damp or use spray to dampen. Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in the table!When turned on for the first time, temporary vapours/odours may occur. Make sure plug is removed from power outlet. Disposal Packaging materials The packaging materials are environmentally friendly and can be recycled. For the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. On the product or on The symbol its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences Soleplate is not heating even though iron is turned on. Put iron on horizontal position and wait before using steam jet function. adjust the proper temperature to steam ironing (up to ). Put iron in vertical position and wait until temperature indicator light turns off. set the temperature dial to a temperature ( to maximum) suitable for steam ironing. Put the iron on its heel and wait until the light has gone out before you start ironing. [. . . ] set the temperature dial to a temperature ( to maximum) suitable for steam ironing. Put the iron on its heel and wait until the light has gone out before you start ironing. Use the self-clean function one or more times. Empty the water tank and set the steam control to position off before storing the iron. [. . . ]