User manual AEG-ELECTROLUX 11325GM-M

[. . . ] Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. Persons (including children) with reduced physical sensory, mental capabilities or lack of experience and knowledge must not use the appliance. They must have supervision or instruction for the operation of the appliance by a person responsible for their safety. [. . . ] The indicator above comes on and after some time goes out. The time of the automatic heat up changes for different heat settings. Touch the control bar at the heat setting. Switching the Power function on and off The Power function makes more power available to the induction cooking zones. the Power function is activated for 10 minutes at most. After that the induction cooking zone automatically switches back to the highest heat setting (9). To switch on, touch , the indicator above comes on. To switch off, touch a heat setting (1-9). Selection of the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. Starting the Count Down Timer: touch of the timer to set the time ( 00 - 99 minutes). To switch off You can also touch and at the same time. Starting the child safety device · start the hob with . Switching off the child safety device · start the hob with . Set the heat setting in less than 10 seconds. When you stop the hob with , the child safety device operates again. When this function operates, you can hear the sounds only when: · You put something on the control panel. Use the induction cooking zones with suitable cookware. cookware for induction cooking zones Important!In induction cooking a powerful electromagnetic field generates an almost instant heat inside the cookware. cookware material · Correct: cast iron, steel, enamelled steel, stainless steel, a multi-layer bottom (marked as correct by a manufacturer). Some water boils very quickly on a zone set to the highest heat setting. The bottom of the cookware must be as thick and flat as possible. [. . . ] Should disappear, residual heat indicator can stay. Cool down the cookware and check it with the section "Cookware for the induction cooking zone". If you tried the above solutions and cannot repair the problem, speak to your dealer or the Customer Care Department. Give the data from the rating plate, three-digit-letter code for the glass ceramic (it is in the corner of the cooking surface) and an error message that comes on. [. . . ]