User manual AEG-ELECTROLUX 1271VITE

[. . . ] 124972910·LAVAMAT1271Tvi 29-09-1999 10:07 Pagina 1 ÖKO-LAVAMAT 1271 T v. i. ELECTRONIC The environmentally friendly washer-dryer La lavadora-secadora ecológica Instruction booklet Instrucciones para el uso 500 700 900 1200 + O G F D C B A 30 40 30 40 95 E 60 50 40 30 60 50 30 40 AUS ERFAHRUNG GUT 124972910·LAVAMAT1271Tvi 29-09-1999 10:07 Pagina 2 Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance. [. . . ] If the programme selector dial is positioned on a wash programme, the duration of that programme will be displayed. 25 124972910·LAVAMAT1271Tvi 29-09-1999 10:08 Pagina 26 How to wash Selection of the desired wash programme Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on. O G F D C B A 30 40 30 40 30 40 95 E 60 50 40 30 60 50 Selection of the spin speed To select the desired spin speed, press the SPIN SPEED button: the corresponding light comes on. 500 700 900 1200 Selection of the STAIN, PREWASH or QUICK WASH option, depending on the degree of soil of the laundry and on the type of fabric. The corresponding light comes on. Selection of the EXTRA RINSE and/or RINSE HOLD option The corresponding light(s) come on. + 26 124972910·LAVAMAT1271Tvi 29-09-1999 10:08 Pagina 27 How to wash Selection of the DELAY START option To delay starting of a programme, press the DELAY START button before starting the machine. The figures corresponding to the selected delay will be displayed for about 2 seconds, after which the duration of the selected programme will appear on the display. When the START/PAUSE button is pressed, the selected delay will again appear on the display and the machine starts its countdown. Starting the programme To start the selected programme, press the START/PAUSE button; the corresponding light stops flashing. The pilot light corresponding to the wash phase which is running is on. After about 30 seconds the programme starts. 27 124972910·LAVAMAT1271Tvi 29-09-1999 10:08 Pagina 28 How to wash At the end of the programme The machine stops automatically and three flashing zeros are displayed. The END and spin speed pilot lights, as well as the pilot light(s) corresponding to the selected option(s), stay on. If the RINSE HOLD option has been selected, the corresponding pilot light on the programme progress display flashes to indicate that the water must be emptied out before opening the door. The pilot light of the START button flashes and tree flashing zeros are displayed. Release of the lock is indicated by an audible signal. Turn the programme selector dial to RESET O. Switch the machine off by pressing the ON/OFF button . Check that the drum is empty so as to avoid a subsequent wash being damaged by any forgotten items. Leave the door open to prevent the formation of mildew and unpleasant smells. 28 124972910·LAVAMAT1271Tvi 29-09-1999 10:08 Pagina 29 How to dry Drying only Warning!Do not exceed the maximum laundry loads: - 2. 25 kg for linen and cottons - 1. 50 kg for synthetics. The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe. Depress the ON/OFF button to switch the machine on. Select the drying programme (for cotton or synthetics). Depress the DRYING TIME button until the time you want appears in the display. Press the START/PAUSE button to start the programme. At the end of the cycle, turn the programme selector dial to RESET O and press the ON/OFF button again to switch the appliance off. Remove the laundry. Automatic washing and drying (NON-STOP programme) Warning! [. . . ] Connect the machine to an earthed socket. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution. Permanent connection In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point. This operation must be performed by a qualified electrician. 49 124972910·LAVAMAT1271Tvi 29-09-1999 10:08 Pagina 50 Building-in This appliance has been designed to be built into the kitchen furniture. [. . . ]