User manual AEG-ELECTROLUX 1682-2GT

[. . . ] The information marked with this symbol provides additional instructions and practical tips on the use of the appliance. Tips and information about economical and ecological use of the machine are marked with the clover symbol. If you require assistance or advice on your appliance, please contact our customer care department by letter or telephone: Customer Care Department AEG Domestic Appliances 55-77 High Street Slough Berkshire SL1 1DZ Tel: 08705 350350* * calls to this number may be recorded for training purposes. Important Your machine is fitted with a balance control device, which ensures the machine is stable during the spin. If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. [. . . ] To remove it press PREWASH and QUICK WASH buttons again until the EXTRA RINSE light comes off. Selection of the DELAYED START option To delay starting of a programme, press the DELAYED START button before starting the machine. The figures corresponding to the selected delay will be displayed for about 5 seconds, after which the duration of the selected programme will appear on the display. If the SOAK button has been pressed the selected delay will correspond to the soak time. If no delay time is selected the soak programme will last about 30 minutes. When the START/PAUSE button is pressed, the selected delay will appear again on the display and the machine starts its countdown. 27 132999111. qxd 7/24/01 11:16 PM Pagina 28 (Nero/Process Black pellicola) How to wash Starting the programme 1. Press START/PAUSE to start the programme. If the Delay Start option has been selected the START/PAUSE programme will start at the end of the countdown. If the door light beside the START/PAUSE button is red and flashing at the start of the programme it indicates that the door is open. Close the door and press the START/PAUSE button again. If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry, to modify or cancel the delay time. Select the drying time or degree of drying. Start the programme by depressing the START/PAUSE button. At the end of the programme, turn the selector dial to O. Remove the laundry. How to dry Drying only Max. load - cottons 2. 75 kg - synthetics 2 kg During the drying programme the water tap must be open and the drain hose must be correctly positioned. Turn the programme selector dial to DRYING for cottons or synthetics. If you wish to carry out the timed drying press the relevant button until the time you want appears in the display. If you wish to carry out the electronic drying depress the relevant button until the light corresponding to the degree of dryness required (store dry or iron dry) illuminates. Press the START/PAUSE button to start the programme. At the end of the cycle turn the programme selector dial to O and remove the laundry. 30 132999111. qxd 7/24/01 11:16 PM Pagina 31 (Nero/Process Black pellicola) Programme chart Wash programmes Wash Temp. [. . . ] Installation should comply with local water authority and building regulations' requirements. Model 1682-2GT Model 14800 50 132999111. qxd 7/24/01 11:16 PM Pagina 51 (Nero/Process Black pellicola) Installation Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. Do not connect to a hot water supply. Model 1682-2GT The inlet hose is provided with a water stop device, which protects against damage caused by water leaks in the hose which could develop due to natural ageing of the hose. This fault is shown by a red sector in the window "A". [. . . ]