User manual AEG-ELECTROLUX 2040B-WGB

[. . . ] such damage is not covered by the warranty. Never use the vacuum cleaner without its filters. 11 Open the front cover on the machine and check that the motor filter and the dust container filter are in place. [. . . ] 3 Insert the hose into the hose handle until the catches click to engage (press the catches to release the hose). Increase suction power by rotaring the control further up to "Max" position. stop the vacuum cleaner by rotaring in the opposite direction to "Off" position. In order to achieve an optimal cyclone effect in the cleaner, the power regulation should always be in the "Max" position. 17b* Suction power can also be adjusted by using the suction control on the hose handle. Use the nozzles as follows: Carpets: * Use the combination floor nozzle with the lever in position (19a). * Use normal setting of floor nozzle (20a). Hard floors: * Use the combination floor nozzle with the lever in position (19b). Note: Do not use the turbo nozzle on skin rugs or carpet fringes. Clear blockage and/or replace filters, empty the dust container and restart. 40 Hose handle could be dismantled from hose if cleaning is needed. 41 It may also be possible to remove the obstruction in the hose by squeezing it. However, be careful in case the obstruction is caused by glass or needles caught inside the hose. Note: The warranty does not cover any damage to the hose caused by cleaning it. 42 Be sure to frequently clean the combination floor nozzle. 43* Press each wheel-hub and draw away the wheels. Remove dust-balls, hair or other objects that may be entangled. 44* Larger objects can be accessed by removing the connection tube from the nozzle. [. . . ] Use the hose handle to clean the nozzle. Use the hose handle to clean the nozzle. 46b* In case the turbo nozzle stops working, open the cleaning lid and remove any objects that obstructs the turbine to rotate freely. [. . . ]