User manual AEG-ELECTROLUX 2072GT

[. . . ] Persons (including children) with reduced physical sensory, mental capabilities or lack of experience and knowledge must not use the appliance. They must have supervision or instruction for the operation of the appliance by a person responsible for their safety. cHILD SAFETY · Only adults can use this appliance. Children must get supervision to make sure that they do not play with the appliance. [. . . ] Make sure that the ventilation in the kitchen is good: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood). ⷠMore ventilation (for example opening of a window or increasing the level of mechanical ventilation where present) is necessary when you operate the appliance with intensity for a long time. There is the risk of injury from electrical current. ⷠDisconnect the appliance from the electrical supply, before you do the maintenance work or you clean it. Make electrical mains terminal free of voltage. A loose and incorrect mains plug and socket connections can make the terminal become too hot. Use the correct mains connection cable and replace the damaged mains cable with applicable cable. Speak to your local Service Force Centre. ⷠThe appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm. ⷠIf the fixing bracket is near to the terminal block, always make sure the connection Cable does not come in contact with the edge of the bracket. ⷠYou must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), ground leakage trips and contactors. 1 The by-pass screw ­ If you change from natural gas G20 20 mbar to liquid gas, fully tighten the by-pass screw in. ­ If you change from liquid gas to natural gas G20 20 mbar, undo the bypass screw approximately 1/4 of a turn (1/2 of a turn for Triple Crown burner). Make sure the flame does not go out when you quickly turn the knob from the maximum position to the minimum position. eLECTRICAL CONNECTION · Ground the appliance according to safety precautions. ⷠMake sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply. ⷠThis appliance is supplied with a mains cable. It has to be supply with a correct plug, able to support the load marked on the rating plate. Any electrical component must be installed or replaced by the Service Force Centre technician or qualified service personnel. Make sure that there is an access to the mains plug after installation. The appliance must not be connected with an extension cable, an adapter or a multiple connection (risk of fire). Check that the ground connection is in conformity with the standard and regulations force. [. . . ] Use pots and pans with diameter applicable to the dimension of burner. Do not use cooking vessels on the hotplate that overlap its edges. Make sure pot handles do not protrude over the front edge of the cooktop and that pots are centrally positioned on the rings in order to achieve maximum stability and to obtain lower gas consumption. Do not place unstable or deformed pots on the rings to prevent from spill and injury. [. . . ]