User manual AEG-ELECTROLUX 2382-2GT

[. . . ] cHILDREN AND VULNERABLE PERSONS SAFETY · Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge to use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety. ⷠChildren must get supervision to make sure that they do not play with the appliance. ⷠKeep all packaging away from children. [. . . ] It comes on when it is necessary to fill the rinse aid container. 1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme operates. To activate the appliance and set a washing programme Turn the programme knob until the programme marker is aligned with one of the washing programmes on the control panel. If the programme marker is aligned with a washing programme, the digital display shows the programme time. ⷠIf the programme marker is not aligned with a washing programme, the display shows two horizontal status bar. To deactivate the appliance Turn the programme knob until the programme marker is aligned with the off position. DELAY START BUTTON Press this button again and again to delay the start of the washing programme from 1 to 19 hours. SETTING MODE The appliance must be in setting mode for these operations: · ­ It is necessary to cancel the programme or the delay start to go back to the setting mode. Be sure that the set level of the water softener agrees with the water hardness in your area. Fill the salt container with dishwasher salt. Fill the rinse aid dispenser with rinse aid. Use long washing programmes when you use the detergent tablets to fully remove the detergent. USE OF DETERGENT To help the environment, do not use more than the correct quantity of detergent. follow the detergent manufacturer recommendations on the detergent packaging. Do these steps to fill the detergent dispenser: 1. Rinse aid makes it possible to dry the dishes without streaks and stains. the rinse aid dispenser automatically adds rinse aid during the last rinsing phase. Do these steps to fill the rinse aid dispenser: 1. Fill the rinse aid dispenser 4 with rinse aid. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during the washing programme. Press the lid until it locks into position. You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (highest dosage). [. . . ] It gives good washing results in a short time. 3) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. Remove the flat filter (C) from the bottom of the appliance. [. . . ]