User manual AEG-ELECTROLUX 3031B-B

[. . . ] Disconnect the plug from the wall socket before cleaning or maintaining the vacuum cleaner. All service and repairs must be carried out by an authorised AEG-Electrolux service centre. Always keep the vacuum cleaner in a dry place. Insert the hose until the catches click to engage (press the catches to release the hose). [. . . ] Never operate the cleaner without the dust container installed. To avoid decreasing performace and fast filter clogging, the dust container should be emptied latest when the dust level reaches the MAX indicator line on the dust container. Use the nozzles as follows: Carpets: Use the combination floor nozzle with the lever in position (7). Hard floors: Use the combination floor nozzle with the lever in position (8). Note: Do not use the turbo nozzle on animal skin rugs or carpet fringes. to avoid damaging the carpet , do not keep the nozzle stationary whilst the brush is rotating. Do not pass the nozzle across electric cables, and be sure to switch off the vacuum cleaner immediately after use. Always operate the cleaner with the dust container installed. Close the dust container trapdoor lid until it clicks shut. 17 Replace the dust container by placing it base first into the cleaner. In such cases, disconnect from mains and allow to cool for 20-30 minutes. Clear blockage and/or replace filters, empty the dust container and restart. However, be careful in case the obstruction is caused by glass or needles caught inside the hose. Note: The warranty does not cover damage caused to the hose while cleaning it. Cleaning the floor nozzle 33 Be sure to frequently clean the combination floor nozzle. Use the hose handle to clean the nozzle. cleaning the turbo nozzle* 34 Disconnect the nozzle from the vacuum cleaner tube and remove entangled threads , etc. Use the hose handle to clean the nozzle. 35 In case the turbo nozzle stops working, open the cleaning lid by pressing the button and remove any objects that obstructs the turbine to rotate freely. AEG-Electrolux decline all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. [. . . ] 35 In case the turbo nozzle stops working, open the cleaning lid by pressing the button and remove any objects that obstructs the turbine to rotate freely. AEG-Electrolux decline all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. This product is designed with the environment in mind. [. . . ]