User manual AEG-ELECTROLUX 30581B-WGB

[. . . ] Always keep these instructions with the appliance also if you move or give it to a different person. The manufacturer is not responsible if an incorrect installation and use causes damage. CHILDREN AND VULNERABLE PERSON SAFETY · Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety. [. . . ] Always obey the instructions that you find on the packaging of the detergent products. Using the liquid detergent 1. Pull out the detergent dispenser until it stops. Pull out the detergent divider from its position (A). FILLING THE DETERGENT AND ADDITIVES Caution!Use only specified detergents for washing machine. A 2 1 1 The detergent compartment for the prewash phase or for the soak programme. Add the detergent for prewash and soak before the start of the programme. electrolux 11 3. Put it into the special guides in the middle of the compartment for the washing phase. CHANGE A FUNCTION You can change only the delay and spin function before they operate. Press the related button to set the new value. Press the delay start button again and again until the display shows the number hours. Press the start button, the appliance starts the countdown of the delay start. The symbol h flashes in the display and the start button indicator is off. When the countdown is completed, the programme starts automatically and the start button indicator comes on. The appliance does not drain the water. 12 electrolux · Remove the laundry from the appliance. · Keep the door ajar, to prevent mildew and odours. The washing programme is completed, but there is water in the drum: ­ The Rinse Hold function or a programme that stops with water in the drum is set. ­ The door stays locked and the start button indicator flashes. ­ You must drain the water before to open the door. When the programme is completed: ­ The display shows the End symbols. Turn the programme knob to activate the appliance. to de- STAND BY After some minutes the end of the washing programme, if you do not deactivate the appliance, the energy saving status activates. The energy saving status decreases the energy consumption when the appliance is on standby. · The brightness of the display goes off. · The display shows the symbol End. Press one of the buttons to deactivate the energy saving status. CARE AND CLEANING Warning! [. . . ] Make sure not to damage the hoses. 9. Remove the power supply cable and the drain hose from the hose holders. 2 1 6. Remove the polystyrene protection from the bottom. 1 10. You can find these caps in the user manual bag. 2 7. [. . . ]