User manual AEG-ELECTROLUX 31000 M-W

[. . . ] Additions or modifications to the appliance are not permitted. Do not place or store flammable liquids, highly inflammable materials or fusible objects (e. g. plastic film, plastic, aluminium) on or near the appliance. Children's safety Small children must be kept away from the appliance. [. . . ] Rub the appliance dry using a clean cloth. Removing deposits 1. Remove heavy deposits from the hotplates using fine scouring powder or a scouring pad. Then heat the hotplate to a low temperature and leave to dry. To maintain the hotplates, rub in a little sewing machine oil now and again and then polish off with absorbent paper. Important: Do not clean the stainless steel edge of the hob with scouring powder or a scouring pad as this will leave scratches!For stainless steel hobs only use suitable stainless steel cleaning and maintenance products. Please the manufacturer's instructions. The stainless steel edge of the plate can be slightly discoloured as a result of thermal load. This process is caused by the physical properties. 1 3 8 What to do if . . . Problem Possible cause Remedy The hotplates are not func- The combination appliance Switch on the appliance. tioning is not switched on The desired heat setting is not set. Set the heat setting. The fuse in the house's Check the fuse. electrical wiring (fuse box) If the fuses trip a number has been tripped. . of times, please call an authorised electrician. 1 3 If you are unable to remedy the problem by following the above suggestions, please contact your dealer or the Customer Care Department. Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs. If the appliance has been wrongly operated, the visit from the customer service technician or dealer may not take place free of charge, even during the warranty period. Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. [. . . ] Move the oven steam outlet pipe with a screwdriver to the centre of the opening in the hob. Then put the outlet connection piece over the pipe. 1 1 10 Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section "What to do if. . . "). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. [. . . ]