User manual AEG-ELECTROLUX 3180V-WGB

[. . . ] The users must fully know the operation and safety functions of the appliance. CHILDREN AND VULNERABLE PEOPLE SAFETY Warning!Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge to use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety. [. . . ] · The appliance become too hot (e. g. Before you use the appliance again, the cooking zone must be cool. The symcomes on and the cooking zone bol deactivates automatically after 2 minutes. · You do not deactivate a cooking zone or change the heat setting. After some time, comes on and the appliance deactivates. See the table. 1. 5 hours THE HEAT SETTING to increase the heat setting. Touch Touch to decrease the heat setting. Touch and at the same time to deactivate the cooking zone. electrolux 7 AUTOMATIC HEAT UP To stop the function touch . 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 POWER FUNCTION The Power function makes more power available to the induction cooking zones. The Power function is activated for 10 minutes at most. After, that the induction cooking zone automatically sets back to , highest heat setting. POWER MANAGEMENT You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. symbol · To deactivate this function touch . The heat setting that you set before comes on. LOCK When the cooking zones operate, you can . It prelock the control panel, but not vents an accidental change of the heat setting. The symbol To start this function touch comes on for 4 seconds. The heat setting that you set before comes on. When you stop the appliance, you also stop this function. THE CHILD SAFETY DEVICE This function prevents an accidental operation of the appliance. To activate the child safety device · Activate the appliance with . · Deactivate the appliance with . To deactivate the child safety device · Activate the appliance with . The symbol · Deactivate the appliance with . [. . . ] should go out of the display, residual heat indicator can stay. Let the cookware become sufficiently cool and check it with the section Cookware for the induction cooking zone. If you tried the above solutions and cannot repair the problem, speak to your dealer or the customer service. Give the data from the rating plate, three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the appliance correctly. If not the servicing by a customer service technician or dealer will not be free of charge, also during the warranty period. [. . . ]