User manual AEG-ELECTROLUX 32413G-D-GB

[. . . ] ingenious and stylish , it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. In the Electrolux webshop, you'll find everything you need to keep all your Electrolux appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags. [. . . ] OptiHeat Control shows the level of the residual heat. The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is hot from the heat of the cookware. Touch for 1 second to activate or deactivate the appliance. You do not set the heat setting after you activate the appliance. ⷠYou spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc. Before you use the appliance again, wait for the cooking zone to cool down. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. ⷠYou do not deactivate a cooking zone or change the heat setting. After some time comes on and the appliance deactivates. The relation between heat setting and times of the Automatic Switch Off function: · -- 5 hours -- 4 hours -- 1. To deactivate the CountUp Timer: set and touch the cooking zone with or to deactivate the timer. Use the Count Down Timer to set how long the cooking zone operates for only this one time. set the Count Down Timer after the selection of the cooking zone. You can set the heat setting before or after you set the timer. ⷠTo set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. When the indicator of the cooking zone start to flash slow, the time counts down. You can use the timer as a Minute Minder while the cooking zones do not operate. When the time comes to an end, the sound operates and 00 flashes. Operates, you cannot change the When heat setting. The heat setting that you set before comes on. When you deactivate the appliance with , the child safety device operates again. [. . . ] Scratches or dark stains on the glass-ceramic cause no effect on how the appliance operates. If not, the dirt can cause damage to the appliance. Put the scraper on the glass surface at an acute angle and move the blade on the surface . ­ Remove after the appliance is sufficiently cool: limescale rings , water rings, fat stains, shiny metallic discolorations. [. . . ]