User manual AEG-ELECTROLUX 520C W

[. . . ] Start/Pause Button This button allows you to start or pause the dryer to check the contents of the load or perhaps add more clothes to the load. NOTE: It will not start or restart a program unless the door safety button has also been pressed in. If the safety button is not pressed in a door switch fault will be indicated (sound "beeps" 6 times). Delay Button This button is a feature that permits you to start the dryer after a defined number of hours, ranging from 3, 6, and 9 hours. To abort the Delayed Start, press the Start/Pause button, which puts the machine into paused mode, allowing you to change the delay time. [. . . ] NOTE: Make sure you have set the disired program before setting the delay. 2 4 Option Button This button allows you to select Buzzer and Crease Free. 5 Use THE CONTROL PANEL (Continued) Buzzer: The Buzzer feature is designed to remind you when the program ends with a "beeps" sound. Crease Free: The Crease Free feature is designed to help prevent creases forming in the clothes after the normal drying cycle has finished. The drum will rotate about 5 seconds every minute and will go for 3 hours. This is useful if you are unable to empty the dryer straigh away. Each successive press will cycle through the options as below. Buzzer Crease Free Buzzer and Crease Free To select this option press and hold the Program and Temperature button together (while the dryer is running) until a beep is heard and the Child Lock LED illuminates for approx 2 seconds. To turn the child lock off press and hold the same buttons (while the dryer is running) until a beep is heard and the LED goes off. Hold the Program and Temperature button together. No Options Selected 5 Temperature Button Is used to select one of the three settings, Normal, Delicates or Airing. The Delicates setting will cause the heater to cycle on for less time than the Normal setting. The heater on/off cycling time will vary on both settings depending on the program selected, ambient temperature etc. On the Airing setting the heater is not used at all. 3. 2 Timer Program Using this mode gives you the option of selecting a number of features from the Timer Program including the Temperature you require. 3. 2. 1 Press the Program button to select either 90, 60 or 30 Minutes from the Timer Program. The indicator light will come on to your choice. Press On/Off button You can use your dryer 2 ways 1. Timer Program 3. 1 Sensor Program This mode gives you the option of selecting different drying levels from the Sensor Program. 3. 1. 1 Press the Program button to select either Extra Dry, Normal Dry or Iron Dry from the Sensor Program button. The indicator light will come on to your choice. Do not select the Extra Dry option for delicates fabric such as polyester as shrinking may occur. 3. 1. 2 Press the Temperature button to select either Normal, or Delicates from the Temperature program. Airing is not available in Sensor Program. The indicator light will come on to your choice. 3. 2. 2 Press the Temperature button to select either Normal, Delicates or Airing. [. . . ] Airing is not available in Sensor Program. The indicator light will come on to your choice. 3. 2. 2 Press the Temperature button to select either Normal, Delicates or Airing. The indicator light will come on to your choice. Now press the Start/Pause button to start the dryer. 4. [. . . ]