User manual AEG-ELECTROLUX 520E-W CH

[. . . ] The manufacturer is not responsible if incorrect installation or use results in damage. CHILDREN AND VULNERABLE PEOPLE SAFETY · This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in safe way and understand the hazards involved. Children shall not play with the appliance. · Keep all packaging away from children. [. . . ] Touch or the automatic recipe activates automatically after five seconds. When set time ends, an acoustic signal operates for two minutes. Touch any sensor field or open the oven door to stop an acoustic signal. AUTOMATIC PROGRAMMES WITH WEIGHT INPUT If you set the weight of the meat, the appliance calculates the roasting time. Touch or to set the weight programme (refer to "Recipe book"). The display shows: cooking time, dura, a default weight, a unit tion symbol of measurement (kg, g). Touch or the settings save automatically after five seconds. A symbol of the weight unit flashes in the display. During this time you can change the deor . When set time ends, an acoustic signal flashes. Touch any sensor field or open the oven door to stop an acoustic signal. The display shows the current core (which shows the temperature and relation between the set oven temperature and the current oven temperature). The core temperature sensor must stay in the meat and in the socket during the cooking. While the appliance calculates the approximate duration time, the value of the Count Up Timer function shows in the Timer/Residual heat display. When the first calculation ends, an acoustic signal sounds, the Timer/Residual heat display shows --:-- and then the approximate duration of the cooking. The appliance continues to calculate the duration during the cooking. The display updates at intervals with the new duration value. When the meat is at the set core temperature, the core temperature and flash. An acoustic signal sounds for two minutes. Touch a sensor field to deactivate the acoustic signal. Remove the core temperature sensor from the socket and remove the meat from the appliance. Be careful when you remove the core temperature sensor. [. . . ] The customer must have a socket for the electrical connection that is accessible and outside the coordination room. The length of the connection cable must be approximately 120 cm with lines connected directly to the mains. Do the electrical connections according to the connection diagram. Connection Diagram 400V 400V 3~ 400V 2. [. . . ]