User manual AEG-ELECTROLUX 611 K

[. . . ] · Repairs to the appliance must only be carried out by trained registered service engineers. 4 Safety during use · Remove stickers and film from the glass ceramic. · There is the risk of burns from the appliance if used carelessly. · Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware. · Overheated fats and oils can ignite quickly. [. . . ] · The edge of the glass ceramic can be damaged by being knocked by the cookware. · Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface. · Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straightaway. · Do not use the cooking zones with empty cookware or without cookware. 5 Description of the Appliance Cooking surface layout Singlecooking zone 1200W Single ring cooking zone 1800W Oven steam outlet Residual heat indicator Residual heat indicator Double ring cooking zone 750/2200W Connection double ring cooking zone with power indicator Singlecooking zone 1200W 6 Touch Control sensor panel The outside ring is switched on and off by touching the Touch Control sensor panel. Sensor panel Double ring cooking zone switch Function To switch the outside ring on and off Residual heat indicator 1 2 The residual heat indicator lights up, as soon as the corresponding cooking zone is hot. After being switched off, the cooking zones need some time to cool down. Residual heat can be used for melting and keeping food warm. Operating the hob You operate the appliance with the combination appliance's ring switches. The operation and the function of the ring switches is described in the Operating Instructions for the combination appliance. When a cooking zone is switched on, it may hum briefly. This is a characteristic of all ceramic glass cooking zones and does not impair either the function or the life of the appliance. 3 To switch the outside ring on and off 3 By switching the outside ring on or off, the effective heating surface can be matched to the size of the cookware. Before the outside ring can be switched on, the inside ring must be switched on. Double ring cooking zone front left To switch on outside ring To switch off outside ring Sensor panel Touch Touch for 2 seconds. Power indicator is lit goes out 7 Tips on Cooking and Frying Cookware · You can recognise good cookware from the bottoms of the pans. Considerable danger to the user may result from improper repairs. If the appliance has been wrongly operated, the visit from the customer service technician or dealer may not take place free of charge, even during the warranty period. 10 Disposal 2 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e. g. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance Please dispose of your old appliance in line with the guidelines for disposal in your community. 11 Installation Instructions Safety instructions The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc. ) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances are to be observed. Drawers may only be installed with a with protective floor directly under the appliance. The cut surfaces of the work top are to be protected against moisture using a suitable sealant. The sealant seals the appliance to the work top with no gap. Do not use silicon sealant between the appliance and the work top. Avoid installing the appliance next to doors and under windows. [. . . ] Loose and inappropriate plug and socket connections can lead to overheating of the plug. · Fit plug and socket connections together properly. A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm. Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors. [. . . ]