User manual AEG-ELECTROLUX 64500G-M

[. . . ] 64500G-M GB IE instruction booklet gas hob 2 Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read thisinstruction manual carefully. It will enable you to navigate all processes perfectlyand most efficiently. To refer to this manual any time you need to, we recommendyou to keep it in a safe place. [. . . ] The stainless steel can become tarnished if excessively heated. Therefore prolonged cooking with potstones, earthenware pans or cast-iron plates is inadvisable. Also, do not use aluminium foil to protect the top during use. Make sure pots do not protrude over the edges of the cooktop and that they are centrally positioned on the rings in order to obtain lower gas consumption. Do not place unstable or deformed pots on the rings: they could tip over or spill their contents, causing accidents. It is advisable to use cast iron recipients or steak plates only on the rear burners, so as not to damage the electronic lighting components. 9 Mainteinance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. This appliance cannot be cleaned with steam or with a steam cleaning machine. The Hob Top Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little wasing up liquid has been added. Avoid the use of the following: - household detergent and bleaches; - impregnated pads unsuitable for non-stick saucepans; - steel wool pads; - bath/sink stain removers. Should the hob top become heavily soiled, the following products are recommended: - For stainless steel hobs use a proprietary stainless steel cleaner. - For other hobs use Hob Brite or Bar Keepers Friend. Do not leave acid or alkaline substances (e. g. vinegar, salt, lemon juice, etc. ) on the cooktop. The burners The burner caps and crowns can be removed for cleaning. Wash the burners taps and crowns using hot soapy water, and remove marks with a mild paste cleaner. after cleaning. If after all these checks, your hob still does not operate correctly, contact your local Service Force Centre. Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. 12 Technical data Engineer technical data OVERALL DIMENSIONS Width: Depth: Width: Depth: 594 mm 510 mm 560 mm 480 mm CUT OUT DIMENSIONS SUPPLY CONNECTIONS Gas: R 1/2 inch (1/2 inch male) Rear right hand corner Electric: 230 V~ 50 Hz supply, 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse. HEAT INPUT Rear Right Burner (rapid) Rear Left Burner (semi rapid) Front Right Burner (auxiliary) Front Left Burner (semi rapid) APPLIANCE CLASS APPLIANCE CATEGORY GAS SUPPLY 3. 0 kW (10239 BTU/HR) 2. 0 kW (6826 BTU/HR) 1. 0 kW (3413 BTU/HR) 2. 0 kW (6426 BTU/HR) 3 II2H3+ Natural gas G20 (2H) 20 mbar 13 Gas burners BURNER RAPID SEMI-RAPID AUXILIARY TYPE OF GAS POSITION NOMINAL THERMAL POWER kW NOMINAL FLOW RATE m3/h NOZZLE REFERENCE 1/100 mm NOMINAL THERMAL POWER kW NOMINAL FLOW RATE g/h NOZZLE REFERENCE 1/100 mm MAX MIN MAX MIN MAX MIN NATURAL GAS 20 mbar VALUE = 37. 78 MJ/m3 Ws - 50. 7 MJ/ m3 3. 0 0. 75 2. 0 0. 45 1. 0 0. 33 0. 286 0. 057 11 9 Adjust. 0. 190 0. 038 0. 095 0. 028 96 Adjust. 70 Adjust. LPG GAS 28-30/37 mbar VALUE = 49. 92 MJ/Kg 2. 8 0. 75 2. 0 144 71 0. 45 29 32 1. 0 72 50 0. 33 21, 5 28 2 0 2 4 3. 5 86 42 14 Important Safety Requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). For appliances installed in the Republic of Ireland please refer to NSAI- Domestic Gas Installation I. S. 813 Current Editions and the ETCI Rules for Electrical Installations. Provision for Ventilation Detailed recommendations are contained in the following British Standards Codes Of Practice: B. S. The hob should not be installed in a bed sitting room with a volume of less than 20 m3. [. . . ] EARTH CONTINUITY CHECK Appliance must be electrically disconnected - meter set on W (Ohms) x 1 scale and adjust zero if necessary. -- Test leads from any appliance earth point to earth pin on plug. Resistance should be less than 0. 1 W (Ohm), check all earth wires for continuity and all contacts clean and tight. INSULATION CHECK Appliance electrically disconnected, all switches ON. [. . . ]