User manual AEG-ELECTROLUX 65300K-MNY71

[. . . ] 2 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Burner ring/cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Do not alter the specifications or attempt to modify the appliance in any way. Maintenance and Cleaning Only clean this gas hob in accordance with the instructions given in this book. Service Repairs carried out by inexperienced persons may cause injury or serious malfunction of the appliance. Repairs must only be carried out by a qualified/competent person. Contact your local AEG Service Centre. During Use The gas hob is intended for domestic cooking only. It is not designed for commercial/industrial purposes. Ensure that all the control knobs are in the OFF position when not in use. Do not use the gas hob if it is damaged in any way, contact your local AEG Service Centre. Disposal Make the gas hob unusable by cutting off the cable Dispose of any packaging material and old appliances at an authorised disposal sites. 4 The primary air intake aperture Must never be accidentally blocked by objects of any kind. 5 Description of the product Air intake Burner Control knob 6 Operations Burner markings Symbols at each control knob indicates which burner is adjusted with the control knob. Front Burner Back burner Panel markings Each control knob has a ring showing the scale of markings. Maximum flame Minimum flame 7 Burner ring/cover Together with the burner ring the burner ring/cover forms a space where the final mixture of gas and air takes place in order to make the gas burn correctly. Please note: It is consequently very important that the individual burner cover/ring is placed correctly on the burner. If the burner ring/cover are wrongly placed the burner will operate incorrectly, and the burners may be damaged within at short space of time. Ignition electrode (A) Each burner has been provided with an ignition electrode. As long as the operating knob is depressed, the automatic ignition will ensure that a spark is emitted between the ignition electrode and the burner cover. Thermo Sensor (B) Ignition electrode (A) Thermo sensor (B) Burnerbody The hob unit features fully-secured gas taps (thermo-fuse) In case the flame goes out, the thermo sensor automatically prevents gas admission after a shorter time (max. Wipe off remaining cleaning agent with a damp cloth. Make sure that the ceramic glass is dry when you heat it up again. Ceramic glass can develop rainbow-like stripes if heated while damp. Spillages must be removed immediately, while the burner is still warm, using a ceramic glass scraper. Especially damaging are melted plastic, aluminium, or any foodstuff containing sugar, including natural sugar, as these can create permanent "pockmarks" and craters on the ceramic surface. After cleaning, polish thoroughly with the cleaning agent supplied with the unit. Defects in the ceramic surface which can be related to the above are not covered by the warranty. Warning: Aluminium foil and plastic utensils should not to be placed on hot surfaces. The surface should not be used for storage. The ceramic glass Immediately scrape off stains caused by food which has boiled over, spilled sugar, dishes containing sugar (jam, juice, etc. ), melted plastic and aluminium foil while the ceramic glass is still hot. If the ceramic glass is allowed to cool it may become damaged. After use the ceramic glass should be wiped with a damp cloth with washing up liquid. [. . . ] The intake has a ½" conical pipe thread (see fig 1) If the appliance is to be connected to a gas cylinder, conversion with the optional modification kit will be necessary. Pressure test The unit should be pressure-tested at Max. 150 mbar. 17 Technical data Type of gas Adjusted to bottled gas: G30-28/37 mbar Convertible to Towngas - G110 / 8 mbar Max. nominal load Q na HS: Medium sized burner = 1, 9 kW x 1 Large sized burner = 2, 7 kW x 1 Total= 4, 6 kW FSD The unit features fully-secured gas taps (thermo-fuse). HS = Top calorific value Q = Nominal load ID. [. . . ]