User manual AEG-ELECTROLUX 6532K-MN

[. . . ] The warning triangle and/or specific words (Warning!, Caution!, Important!) are used to highlight information that is important for your safety or the function of the appliance. It is imperative that this information is observed. This symbol guides you step by step through the operation of the appliance. . . . 1 3 2 Next to this symbol you will find additional information and practical tips on using the appliance. [. . . ] In this way you will avoid the food being overcooked by the automatic warm up function. 3 16 Operation of the Cooking Surface Locking/unlocking the control panel At any time during the cooking process, the control panel can be locked, with the exception of the "On/Off" button. By this means accidental changes to the settings can be prevented. This function is also useful as a child safety measure. 0 1. Touch the o button until the indicator illuminates. To unlock, touch the lock button again until the indicator extinguishes. If lock button is active when the cooking surface is completely switched off by touching the mains button, when the cooking surface is switched on again, the lock button is active. This means that the lock button must be operated first, before the rings can be switched on again. 17 Operation of the Cooking Surface Timer function Setting/changing the cooking time 0 1. Select the desired cooking zone using the cooking zone selection buttons and set the desired heat setting. Press the "Timer" button to activate the timer function for this cooking zone. Using the + or - buttons, set or change the amount of time required until the cooking zone is to switch off automatically (e. g. The timer starts after a few seconds and indicates the amount of time left. The small "Timer Active" indicator is also illuminated for the respective cooking zone, e. g. If there is a suitable pan on the selected cooking zone, the second + third rings on the triple ring zone or casserole zone switch on automatically if required (depending on the size of the pan). 3 Suitable pans for pan and triple ring sensing: ­All metallic pans with flat bases, ­All pans with a base diameter that is no more than 2 cm smaller than the cooking zone marked. (Pay particular attention to the diameter of the base when buying pans, most manufacturers give the diameter of the rim). Pans not suitable for pan and triple ring sensing: ­glass, clay and ceramic items, ­pans with uneven bases, ­pans with a base less than 12 cm in diameter. If you would nevertheless like to use the above mentioned pans, you can disable automatic pan and triple ring sensing: Switching off automatic pan and triple ring sensing: 1. Select the desired cooking zone using the cooking zone selection buttons and set the desired heat setting. Touch the "Triple Ring Zone/Casserole Zone" button, leave your finger on the button and, within 10 seconds, touch the cooker zone selection button for the desired cooking zone. An acoustic tone confirms the entry. 3 0 20 Operation of the Cooking Surface Switching on and off the triple ring or casserole zone (when pan and triple ring sensing is switched off): 0 1. Select the cooking zone using the appropriate cooking zone selection button and set the desired heat setting. Press the "Triple Ring Zone/Casserole Zone button k. The indicator under the II symbol illuminates. The outer ring is switched on by pressing the button again. [. . . ] ­The product is installed taking into account regulations in your new country. Before you move please contact your nearest Customer Care Centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Germany Italy Sweden UK Senlis Nürnberg Pordenone Stockholm Slough +33 (0) 44 62 29 29 +49 (0) 911 323 2600 +39 (0) 1678 47053 +46 (0) 8 738 7910 +44 (0) 1753 219899 2. 3. 4. [. . . ]