User manual AEG-ELECTROLUX 66030K-MN 52S FALCON

[. . . ] Important advice for the safety of persons and information on avoiding damage to the appliance General information and advice Information on environmental protection Dangerous voltage Operating Instructions Safety instructions Description of the Appliance Cooking surface layout Control panel layout Touch Control sensor fields Displays Residual heat indicator Operating the appliance Switching the appliance on and off Setting the heat setting Locking/unlocking the control panel Using the automatic warm-up function Using the child safety device Using the timer Automatic switch off Tips on Cooking and Frying Cookware Energy saving Examples of cooking applications Cleaning and Care What to do if . If you do not, any damage resulting is not covered by the warranty. This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely. Do not leave the appliance unattended during operation. [. . . ] After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds, otherwise the appliance automatically switches itself off. Function Automatic cut-out Condition a heat setting is set Outcome after the time has elapsed acoustic signal 00 flashes Cooking zone switches off acoustic signal 00 flashes Cooking zones not in use If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. Control panel Touch once Display Pilot light of the first cooking zone flashes Pilot light of the second cooking zone flashes Pilot light of the third cooking zone flashes Pilot light of the fourth cooking zone flashes If the pilot light is flashing more slowly, the heat setting can be set or modified. If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes. Touch or 00 to 99 minutes After a few seconds the pilot light flashes more slowly. Control panel Select cooking zone Touch Indicator Pilot light of cooking zone selected flashes faster Time remaining is displayed The time remaining counts backwards to 00. Indicator Pilot light of the selected cooking zone flashes faster Time remaining is displayed 2. Touch or 01 to 99 minutes After a few seconds, the pilot light flashes more slowly. Display Pilot light of the cooking zone selected flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. If one or more sensor fields are covered by objects (a pan, cloths, etc. 10 seconds, a signal sounds and the cooking surface switches off automatically. If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. Before being used again, the cooking zone must be set to . Heat setting v, 1 - 2 3-4 5 6-9 Switches off after 6 hours 5 hours 4 hours 1. According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much. You can recognise good cookware from the bottoms of the pans. Cookware made of enamelled steel or with aluminium or copper bottoms can leave discolorations on the glass ceramic surface which are difficult or impossible to remove. [. . . ] The appliance is installed in accordance with all relevant regulations in force within your new country of residence. The provisions of this European Guarantee do not affect any of the rights granted to you by law. In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section "What to do if. If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. [. . . ]