User manual AEG-ELECTROLUX 66200K-MN 93F

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. [. . . ] The child safety device is switched off. Step Display/Signal lights up 3 The child safety device can only be switched on and off, if no heat setting is set. Overriding the child safety device The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards. Switch appliance on Touch for 4 seconds 2. lights up Until the appliance is next switched off, it can used as normal. Step 3 After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds, otherwise the appliance automatically switches itself off. 12 Operating the appliance Using the timer Function Automatic cut-out Condition a heat setting is set Outcome after the time has elapsed acoustic signal 00 flashes Cooking zone switches off acoustic signal 00 flashes Countdown timer cooking zones not in use 3 3 If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. If a cooking zone is switched off, the timer function set is also switched off. Selecting a cooking zone Step 1. Control panel Touch once Display Pilot light of the first cooking zone flashes Pilot light of the second cooking zone flashes Pilot light of the third cooking zone flashes Pilot light of the fourth cooking zone flashes 2. Touch once 3. Touch once 4. Touch once 3 3 If the pilot light is flashing more slowly, the heat setting can be set or modified. If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes. Operating the appliance 13 Setting the time Step 1. Control panel Indicator Select cooking Pilot light for the cooking zone selected zone flashes 2. Touch or 00 to 99 minutes After a few seconds the pilot light flashes more slowly. Rub the appliance dry using a clean cloth. Remove Type of dirt sugar, food containing sugar plastics, tin foil limescale and water rings fat splashes shiny metallic discolouration immediately yes yes ------when the appliance has cooled down ----yes yes yes cleaner for glass ceramic or stainless steel* using a scraper* *Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops, supermarkets, the parts department of your local Service Force Centre or from www. shop. electrolux. co. uk 3 3 Remove stubborn residues with a cleaner for glass ceramic or stainless steel. Scratches or dark stains on the glass ceramic that cannot be removed do not however affect the functioning of the appliance. What to do if . . . 19 What to do if . . . Problem Possible cause Remedy The cooking zones will not More than 10 seconds have Switch the appliance on again. switch on or are not function- passed since the appliance was ing switched on The child safety device is switched on Several sensor fields were touched at the same time Deactivate the child safety device (See the section "Child safety device") Only touch one sensor field Automatic switch off has been Remove any objects (pan, triggered cloths, etc. ) that are lying on the control panel. Switch the appliance on again STOP+GO is activated Acoustic signal sounds when appliance is switched off The residual heat indicator is not displaying anything The control panel is wholly or partly covered by objects. Switching off STOP+GO Remove objects. The cooking zone was only on If the cooking zone is supfor a short time and is there- posed to be hot, call the Cusfore not hot tomer Service Department. Let the cooking zone cool down The highest heat setting has the same power as the automatic warm up function The automatic warm up func- There is still residual heat on tion is not switching itself on the cooking zone The highest heat setting is set The heat setting was set using 1. Switching off the cooking the sensor field zone 1. Set the cooking zone using the sensor field Acoustic signal sounds and appliance switches itself on and then off again; after 5 seconds another acoustic signal sounds is lit The On/Off sensor field has been covered up, e. g. by a cloth Do not place any objects on the control panel Overheating protection for the Switch off the cooking zone. cooking zone has been trigSwitch the cooking zone on gered again Automatic switch off has been Switch off the cooking zone. triggered Switch the cooking zone on again 20 What to do if . . . Problem and number are displayed Possible cause Electronics fault Remedy Disconnect the appliance from the electrical supply for a few minutes (Take the fuse out of the house's wiring system) If after switching on again, is displayed again, call the customer service department 1 3 If you are unable to remedy the problem by following the above suggestions, please contact your local Service Force Centre. [. . . ] When you have cut it to length (add a few mm), press the two ends flush up against one another. 24 Assembly Assembly Assembly 25 26 Assembly 27 Rating Plate 66200K-MN 93F 55HAD53AO AEG-ELECTROLUX 949 592 290 230 V 50 Hz 6, 4 kW 28 Guarantee/Customer Service Guarantee/Customer Service Standard guarantee conditions We, AEG-Electrolux, undertake that if within 12 months of the date of the purchase this AEG-Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer's instructions. The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us. Electrolux Service Force Centre must undertake all service work under this guarantee Any appliance or defective part replaced shall become the Company's property. [. . . ]