User manual AEG-ELECTROLUX 66320KF-N 64I

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. [. . . ] Control panel Switch on the appliance (Do not set a heat setting) Touch for 3 seconds Indicator/Signal Power indicator goes out, 2x acoustic signal Touch of any one of the cooking zones Appliance switches off. The child safety device is switched on. Overriding the child safety device The child safety device can be released in this way for a single cooking session; it remains activated afterwards. control panel Switch on the appliance and touch any one of the Indicator/Signal acoustic signal cooking zones Until the appliance is next switched off, it can be used as normal. 3 After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds, otherwise the appliance automatically switches itself off. Deactivating the child safety device Control panel Indicator/Signal 1. Touch of any one of the cooking zones Appliance switches off. The child safety device is switched off. Step Operating the appliance 13 Using the timer Function Automatic cut-out Condition a heat setting is set Outcome after the time has elapsed acoustic signal 00 flashes Cooking zone switches off acoustic signal 00 flashes Countdown timer cooking zones not in use 3 3 If a cooking zone is switched off, the timer function set is also switched off. If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. Selecting a cooking zone Step 1. Control panel Touch once Display Pilot light of the first cooking zone flashes Pilot light of the second cooking zone flashes Pilot light of the third cooking zone flashes Pilot light of the fourth cooking zone flashes 2. Touch once 3. Touch once 4. Touch once 3 3 If the pilot light is flashing more slowly, the heat setting can be set or modified. If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes. 14 Operating the appliance Setting the time Step 1. Control panel Indicator Select cooking Pilot light for the cooking zone selected zone flashes 2. Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. Rub the appliance dry using a clean cloth. Removing deposits 1. Place a scraper on the glass ceramic surface at an angle. Remove residues by sliding the blade over the surface. Wipe the appliance with a damp cloth and a little washing up liquid. Rub the appliance dry using a clean cloth. Remove Type of dirt sugar, food containing sugar plastics, tin foil limescale and water rings fat splashes shiny metallic discolouration immediately yes yes ------when the appliance has cooled down ----yes yes yes cleaner for glass ceramic or stainless steel* using a scraper* *Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops 3 3 Remove stubborn residues with a cleaner for glass ceramic or stainless steel. Scratches or dark stains on the glass ceramic that cannot be removed do not however affect the functioning of the appliance. 20 What to do if . . . What to do if . . . Problem Possible cause Remedy The cooking zones will not More than 10 seconds have Switch the appliance on again. switch on or are not function- passed since the appliance was ing switched on The child safety device is switched on Several sensor fields were touched at the same time Deactivate the child safety device (See the section "Child safety device") Only touch one sensor field Automatic switch off has been Remove any objects (pan, triggered cloths, etc. ) that are lying on the control panel. Switch the appliance on again Acoustic signal sounds when appliance is switched off The residual heat indicator is not displaying anything The control panel is wholly or partly covered by objects. [. . . ] Otherwise hot cookware may be knocked off the rings when doors and windows are opened. Make electrical mains terminal free of voltage. Ensure anti-shock protection by installing correctly. The appliance must be connected to the electrical supply by a qualified electrician. [. . . ]