User manual AEG-ELECTROLUX 66331 K-MN

[. . . ] 2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] After the automatic warm up is completed, the heat setting / is displayed again. The length of time that the automatic warm up function operates depends on the heat setting selected. Using the child safety device The child safety device prevents unintentional use of the appliance. Touch for 4 seconds The child safety device is switched on. The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards. Touch for 4 seconds lights up Until the appliance is next switched off, it can used as normal. After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds, otherwise the appliance automatically switches itself off. Switching off the child safety device Touch for 4 seconds 3. Step Display/Signal lights up Function Automatic cut-out Condition a heat setting is set Outcome after the time has elapsed acoustic signal 00 flashes Cooking zone switches off acoustic signal 00 flashes Cooking zones not in use If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. Control panel Touch TIMER once Display Pilot light of the first cooking zone flashes Pilot light of the second cooking zone flashes Pilot light of the third cooking zone flashes Pilot light of the fourth cooking zone flashes If the pilot light is flashing more slowly, the heat setting can be set or modified. If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes. Touch or 00 to 99 minutes After a few seconds the pilot light flashes more slowly. Control panel Select TIMER cooking zone Touch Indicator Pilot light of cooking zone selected flashes faster Time remaining is displayed The time remaining counts backwards to 00. Indicator Pilot light of the selected cooking zone flashes faster Time remaining is displayed 2. Touch or 01 to 99 minutes After a few seconds, the pilot light flashes more slowly. Display Pilot light of the cooking zone selected flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. If one or more sensor fields are covered by objects (a pan, cloths, etc. 10 seconds, a signal sounds and the cooking surface switches off automatically. If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. [. . . ] The cut surfaces of the worktop are to be protected against moisture using a suitable sealant. The sealant seals the appliance to the work top with no gap. Do not use silicon sealant between the appliance and the work top. Avoid installing the appliance next to doors and under windows. [. . . ]