User manual AEG-ELECTROLUX 68031K-MN 10S

[. . . ] 2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards. Touch for 4 seconds lights up Until the appliance is next switched off, it can used as normal. After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds, otherwise the appliance automatically switches itself off. Switching off the child safety device Touch for 4 seconds 3. Step Display/Signal lights up Switching the power function on and off The power function makes more power available to the induction cooking zones, e. After that the induction cooking zone automatically switches back to heat setting 14. To switch on To switch off Control panel Touch Touch a heat setting Display Power Management The cooking zones of the cooking surface have a maximum power available to them. Two cooking zones make up a pair (see figure). So that the Power function can always be carried out, Power Management may reduce the power of the other cooking zone in the pair Example: heat setting 14 is selected on a cooking zone. the Power function is switched on for the cooking zone paired up with it. The Power function is performed, but heat setting 14 on one cooking zone and Power function on the other cooking zone of a pair exceeds the maximum output for both. Therefore Power Management reduces the first cooking zone that was switched on from 14 to 7, for example, and the display for this cooking zone alternates between 14 and 7 and then remains on the current maximum of 7. (Whether the display alternates between 14 and 7 or 14 and 6 or other values, depends on the appliance type and the size of the cooking zone. Function Automatic cut-out Condition a heat setting is set Outcome after the time has elapsed acoustic signal 00 flashes Cooking zone switches off acoustic signal 00 flashes Cooking zones not in use If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. Control panel Touch once Display Pilot light of the first cooking zone flashes Pilot light of the second cooking zone flashes Pilot light of the third cooking zone flashes Pilot light of the fourth cooking zone flashes If the pilot light is flashing more slowly, the heat setting can be set or modified. If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes. Touch or 00 to 99 minutes After a few seconds the pilot light flashes more slowly. Control panel Indicator Select cooking zone Pilot light of cooking zone selected flashes faster Time remaining is displayed 2. Control panel Indicator Select cooking zone Pilot light of the selected cooking zone flashes faster Time remaining is displayed 2. Touch or 01 to 99 minutes After a few seconds, the pilot light flashes more slowly. Control panel field Display Select cooking zone Pilot light of the cooking zone selected flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. [. . . ] The sealant seals the appliance to the work top with no gap. Do not use silicon sealant between the appliance and the work top. When building in, protect the underside of the appliance from steam and moisture, e. Avoid installing the appliance next to doors and under windows. [. . . ]