User manual AEG-ELECTROLUX 723

[. . . ] When using the sewing machine, basic safety precautions should always be followed, including the following: " Read all instruction before using. The sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electrical outlet immediately after using and before cleaning. Always unplug before changing the light bulb. [. . . ] (2) Keep turning forward the halance wheel until thread take-up Iever is at its highest position. Pull the upper thread so as to pull up the lower thread. (3) Leave about 5 cm of both threads and pull them under the presser foot then toward the back of the presser foot. While doing straight stitching, both upper and lower threads must be knotted between the two layers of garment. (1) Adjust selection dial of thread tension disc within the window. (1) Regulated indicator (2) The smaller the tension of upper thread is bigger, turn up the indicator. In order to achieve good effect of zigzagging, the tension of upper thread should be less than that of straight stitching. The upper thread should be visible from the reverse. Needle is pulled out from fabric and the desired size of stitching should he selected on the selection dial. As for stitching Double Action stitching, its length should be adjusted into "(1)-(10)". With the following adjustment, the length of stitchcould be selected as you like. Selection dial 2 and 3 should be different as shown in illustration Model 713 / 723). -Turn the selection dial with help adjust stitch to its ideal length. - The bigger the number is, the longer the stitch is . " is the correct range of adjustment for making buton holes -Range from 0. 5 to 4 could be used for zigzag stitching -The correct elastic stitch value should be "(1)-(10)" How to make the elastic stitch better?In case the elastic stitch turns out to be unsatisfactory, you may turn the selection dial to " - " and in this way, stitches would be thicker while turning to "+" they would be more sparse. The needle should be stopped at a rather high position above fabric. If the reverse button is always pressed down, the machine will do reverse stitching all the time. (1) Life the cover (1) Cover (2) Lower the feed dog by pulling down the shaft and moving it towards the direction inclicated by the arrow head as shown in the illustration. (2) Lower teeth lever (3) Raise the feed dog by pulling down the lower teeth lever and moving it towards the direction indicated and reach "A" by the arrowhead as shown in the illustration. Instruction: for ordinary sewing, all the feed dog shall be raised. [. . . ] Bring the neddle into the fabrics before starting sewing and lower the presser foot. Adhere tightly the decorative parts to the fabrics or iron it with solvable non-woven textiles. Stitch around the decorative parts and make sure that suture beyond the decorative parts should disappear. Insert the needle into the cloth when encountering corner. [. . . ]